Traduzir "nieuw geïnstalleerd knx systeem" para inglês

Mostrando 50 de 50 traduções da frase "nieuw geïnstalleerd knx systeem" de holandês para inglês

Tradução de holandês para inglês de nieuw geïnstalleerd knx systeem

holandês
inglês

NL De KNX RF/TP-mediakoppelaar vormt de brug tussen een bedrade KNX TP-installatie en de draadloze uitbreiding met KNX RF: deze is bedoeld als KNX bereik-/lijnkoppelaar voor de verbinding van de KNX RF componenten.

EN The KNX RF/TP media coupler forms the link between a wired KNX TP installation and its wireless extension with KNX RF: It acts as a KNX area/line coupler for connecting the KNX RF components.

holandêsinglês
knxknx
vormtforms
bedradewired
draadlozewireless
uitbreidingextension
componentencomponents
rfrf
installatieinstallation

NL De KNX RF/TP-mediakoppelaar vormt de brug tussen een bedrade KNX TP-installatie en de draadloze uitbreiding met KNX RF: deze is bedoeld als KNX bereik-/lijnkoppelaar voor de verbinding van de KNX RF componenten.

EN The KNX RF/TP media coupler forms the link between a wired KNX TP installation and its wireless extension with KNX RF: It acts as a KNX area/line coupler for connecting the KNX RF components.

holandêsinglês
knxknx
vormtforms
bedradewired
draadlozewireless
uitbreidingextension
componentencomponents
rfrf
installatieinstallation

NL om een perfecte KNX-communicatie via WLAN te garanderen, is een Gira KNX IP-router (vanaf versie v3) vereist, die speciaal is uitgerust met de extra functie ‘betrouwbare KNX-communicatie’.

EN To ensure faultless KNX communication in a wireless network at all times, a Gira KNX IP router (version v3 and above) is required that is specially equipped with an additional “reliable KNX communication” function.

holandêsinglês
giragira
knxknx
versieversion
vereistrequired
speciaalspecially
functiefunction
communicatiecommunication
routerrouter

NL De Gira KNX DALI-gateway is de interface tussen de KNX-installatie en de DALI-verlichtingsinstallatie. Hiermee kunnen maximaal 64 DALI-deelnemers in maximaal 32 groepen via het KNX-systeem worden geschakeld en gedimd.

EN The Gira KNX DALI gateway is the interface between the KNX installation and the DALI lighting system. It enables switching and dimming of up to 64 DALI devices in a maximum of 32 groups via the KNX system.

holandêsinglês
giragira
interfaceinterface
maximaalmaximum
groepengroups
dalidali
kunnenenables

NL De Gira KNX DALI-gateway is de interface tussen de KNX-installatie en de DALI-verlichtingsinstallatie. Hiermee kunnen maximaal 64 DALI-deelnemers in maximaal 32 groepen via het KNX-systeem worden geschakeld en gedimd.

EN The Gira KNX DALI gateway is the interface between the KNX installation and the DALI lighting system. It enables switching and dimming of up to 64 DALI devices in a maximum of 32 groups via the KNX system.

holandêsinglês
giragira
interfaceinterface
maximaalmaximum
groepengroups
dalidali
kunnenenables

NL Met de module 24 V WLAN kan de Gira G1 in de inbouwdoos van een reeds bestaande tastsensor voor het KNX-systeem worden geïnstalleerd. De stroomvoorziening vindt dan plaats via de KNX-leiding, gegevens worden via WLAN overgedragen.

EN With the 24 V WLAN module, the Gira G1 can be installed in the flush-mounted box of an existing pushbutton sensor for the KNX system. Power is then supplied via the KNX line, and the data is transferred via WLAN.

holandêsinglês
giragira
bestaandeexisting
geïnstalleerdinstalled
overgedragentransferred
vv

NL Als bedieningsapparaat voor een bestaand of nieuw geïnstalleerd KNX-systeem kan de Gira G1 alle functies van de gebouwentechniek en in combinatie met de Gira DCS-IP-gateway ook het Gira deurcommunicatiesysteem ter beschikking stellen

EN As an operating device for an existing or newly installed KNX system, the Gira G1 can provide all of the building technology functions and, when combined with the Gira DCS-IP Gateway, it also provides the functions of the Gira door communication system

holandêsinglês
bestaandexisting
nieuwnewly
geïnstalleerdinstalled
kancan
giragira

NL Via een KNX/IP gateway kan de hele KNX installatie gevisualiseerd worden in Homey

EN Homey can visualize the entire KNX installation when connected to a simple KNX/IP gateway

holandêsinglês
viawhen
knxknx
ipip
kancan
heleentire
installatieinstallation
homeyhomey

NL Bovendien kunnen de parameters van de KNX installatie worden ingesteld door middel van de ETS en de Gira X1 als KNX interface.

EN The KNX system can also be configured using ETS and the Gira X1 as a KNX interface.

holandêsinglês
knxknx
installatiesystem
ingesteldconfigured
giragira
interfaceinterface

NL De Gira KNX tastsensor 3 is een bedieningseenheid voor het KNX systeem

EN The Gira KNX pushbutton sensor 3 is an operation unit for the KNX system

holandêsinglês
giragira
knxknx
systeemsystem

NL Dealer zoeken: hier vindt u elektriciens, KNX specialisten en systeemintegratoren voor het KNX systeem

EN Dealer search: Electricians, KNX specialists and system integrators can be found here.

holandêsinglês
dealerdealer
zoekensearch
hierhere
vindtfound
knxknx
specialistenspecialists
systeemsystem

NL Als een van de eerste KNX bedieningselementen zorgt de Gira G1 met KNX Secure voor een hogere gegevensbeveiliging in het dagelijks leven

EN As one of the first KNX operating elements, it provides increased everyday data security with KNX Secure

holandêsinglês
knxknx
securesecure
hogereincreased
dagelijkseveryday

NL In KNX installaties met een Gira HomeServer kan de Gira G1 alternatief ook als HomeServer client voor de besturing van het KNX systeem worden gebruikt

EN In KNX systems with a Gira HomeServer, the Gira G1 can alternatively also be used as a HomeServer Client for controlling the KNX system

holandêsinglês
knxknx
giragira
kancan
alternatiefalternatively
clientclient

NL Dit betekent dat de Gira G1 kan worden gebruikt als SIP-huisstation en KNX interface voor de gebouwbesturing (KNX of eNet)

EN The dual function of the Gira G1 means it can be used as a SIP home station and as an interface for building control (KNX or eNet)

holandêsinglês
betekentmeans
giragira
gebruiktused
knxknx
interfaceinterface
ofor
enetenet

NL Gira KNX bewegingsmelders dienen voor de besturing van verschillende functies afhankelijk van de bewegingen van personen. Hij zendt vervolgens een schakelcommando aan het KNX systeem en activeert zo diverse, individueel vooraf ingestelde acties.

EN Gira KNX motion detectors are used for the on-demand control of different functions depending on the movements of people. Accordingly, it sends a switching command to the KNX system and thereby triggers various individually preset actions.

holandêsinglês
giragira
knxknx
bewegingsmeldersmotion detectors
besturingcontrol
functiesfunctions
personenpeople
zendtsends
systeemsystem
actiesactions

NL Met de KNX RF handzenders wordt de besturing mobiel: vanaf elke plek in huis kan de gewenste KNX functie comfortabel via de afstandsbediening worden geactiveerd.

EN KNX RF hand-held transmitters mean that you are in control wherever you are: The desired KNX function can be conveniently activated by remote control from any point in the building.

holandêsinglês
knxknx
besturingcontrol
gewenstedesired
functiefunction
comfortabelconveniently
geactiveerdactivated
rfrf

NL Met de Gira KNX aanwezigheidsmelders kan, in combinatie met het Gira KNX systeem, een automatische licht- en klimaatregeling worden gerealiseerd.

EN Together with the Gira KNX system, the Gira KNX presence detector allows automatic lighting and air conditioning control.

holandêsinglês
giragira
knxknx
systeemsystem
automatischeautomatic
lichtlighting

NL De Gira KNX drukcontact-busaankoppelaars vormen de interface tussen het KNX systeem en de gebruiker. De robuuste apparaten zijn bedoeld voor gebruik in objecten waaraan bijzondere eisen worden gesteld.

EN The Gira KNX bus coupler buttons provide the interface between the KNX system and the user. The extremely robust devices are ideal for use in properties with particular requirements.

holandêsinglês
giragira
knxknx
interfaceinterface
robuusterobust
bijzondereparticular
eisenrequirements

NL De Gira KNX CO₂-sensor bewaakt betrouwbaar temperatuur, luchtvochtigheid en CO₂-concentratie in gebouwen en stuurt binnen het KNX systeem gerichte maatregelen aan voor behoud van de kwaliteit van het binnenklimaat.

EN The Gira KNX CO₂ sensor reliably monitors the temperature, humidity and CO₂ concentration in buildings, and it controls targeted measures in the KNX system for maintaining the indoor climate.

holandêsinglês
giragira
knxknx
coco
bewaaktmonitors
betrouwbaarreliably
temperatuurtemperature
luchtvochtigheidhumidity
gebouwenbuildings
systeemsystem
gerichtetargeted
maatregelenmeasures
sensorsensor
concentratieconcentration

NL Het Gira KNX weerstation Plus meet negen verschillende meteorologische parameters en geeft deze door aan het KNX systeem via de geïntegreerde busaankoppeling

EN The Gira KNX weather station Plus measures nine different meteorological parameters and makes them available to the KNX system via the integrated bus coupler

holandêsinglês
giragira
knxknx
parametersparameters
systeemsystem
geïntegreerdeintegrated

NL De Gira KNX ingangsmodules en drukcontactinterfaces zijn bedoeld om conventionele sensoren te integreren in het KNX systeem

EN The Gira KNX input modules and button interfaces serve to integrate conventional sensors in the KNX

holandêsinglês
giragira
knxknx
conventioneleconventional
sensorensensors

NL De bereik-/lijnkoppelaar verbindt datatechnisch twee KNX lijnen met elkaar en zorgt voor galvanische scheiding tussen deze lijnen. Daardoor kan elke buslijn van een KNX installatie elektrisch onafhankelijk van de andere lijnen worden gebruikt.

EN The area/line coupler connects two KNX lines to each other for data transfer and ensures electrical isolation between these lines. As a result, each bus line of a KNX installation can be electrically operated independently of the other lines.

holandêsinglês
verbindtconnects
knxknx
installatieinstallation
onafhankelijkindependently
gebruiktoperated

NL De Gira KNX IP-interface is bedoeld om een pc aan KNX componenten te koppelen voor adressering, programmering en diagnose binnen het systeem. De aansluiting op het datanetwerk vindt plaats met RJ45-bussen.

EN The Gira KNX IP interface is used to connect a PC to KNX components for addressing, programming, and diagnostics within the system. Connection to the data network is via RJ45 pin jacks.

holandêsinglês
giragira
knxknx
pcpc
componentencomponents
interfaceinterface

NL Met de Gira USB-gegevensinterface met geïntegreerde busaankoppelaar kan een pc aan het KNX systeem worden gekoppeld voor adressering, programmering en diagnose van KNX componenten

EN The Gira USB data interface with integrated bus coupler enables a PC to be connected to the KNX system for addressing, programming, and diagnosing KNX components

holandêsinglês
giragira
geïntegreerdeintegrated
pcpc
knxknx
systeemsystem
gekoppeldconnected
componentencomponents
usbusb
kanenables

NL De Gira KNX-aanwezigheidsmelder is bedoeld voor nauwkeurige aanwezigheidsbewaking en bewegingsdetectie binnen met het Gira KNX-systeem

EN The Gira KNX presence detector is used for precise presence monitoring and motion detection indoors using the Gira KNX system

holandêsinglês
giragira
nauwkeurigeprecise
bewegingsdetectiemotion detection
binnenindoors
systeemsystem

NL De KNX-voeding 1280 mA beschikt bovendien over een potentiaalvrij meldcontact voor bedrijfs- en diagnosemelding. Net als de varianten met 160 mA, 320 mA en 640 mA kan het parallel aan KNX-voedingen worden aangesloten.

EN The KNX power supply 1280 mA also has a zero-voltage signal contact for operating and diagnostic messages. Like the 160 mA, 320 mA and 640 mA versions, it can be connected in parallel with KNX power supplies of the same type.

holandêsinglês
variantenversions
parallelparallel
aangeslotenconnected
knxknx
mama

NL KNX DALI-Gateway Plus voor het KNX systeem

EN KNX DALI gateway Plus for the KNX system

holandêsinglês
knxknx
plusplus
systeemsystem
dalidali

NL In vergelijking met zijn voorganger, de Gira KNX DALI-gateway, biedt de Gira KNX DALI-gateway Plus een grotere functionaliteit die veel ruimte laat voor het creëren van individuele verlichtingsconcepten

EN Compared with its predecessor, the Gira KNX DALI gateway, the Gira KNX DALI gateway Plus offers enhanced functionality, which allows a great deal of freedom in designing individual lighting concepts

holandêsinglês
vergelijkingcompared
voorgangerpredecessor
giragira
knxknx
functionaliteitfunctionality
ruimtegreat
laatallows
dalidali

NL Met de Gira KNX-aanwezigheidsmelders Standard en Komfort kan, in combinatie met het Gira KNX-systeem, een automatische licht- en klimaatregeling worden gerealiseerd.

EN When used in conjunction with the Gira KNX system, the Gira KNX presence detectors Standard and Komfort enable automatic lighting and climate control.

holandêsinglês
giragira
standardstandard
automatischeautomatic
systeemsystem
lichtlighting

NL De Gira KNX CO₂-sensor met humidistaat en kamerthermostaat bewaakt temperatuur, luchtvochtigheid en CO₂-concentratie in gebouwen en stuurt binnen het KNX-systeem maatregelen aan voor behoud van de kwaliteit van het binnenklimaat.

EN The Gira KNX CO₂ sensor with humidity and room temperature controller monitors temperature, humidity and CO₂ concentration in buildings, and controls measures for maintaining the room climate within the KNX system.

holandêsinglês
giragira
coco
bewaaktmonitors
temperatuurtemperature
luchtvochtigheidhumidity
gebouwenbuildings
maatregelenmeasures
sensorsensor
concentratieconcentration
systeemsystem

NL Met de optioneel verkrijgbare Gira KNX-module kan de Gira rookmelder Dual Q aan een KNX-systeem worden gekoppeld

EN The Gira KNX module, which is available as an option, allows users to connect the Gira Dual Q smoke alarm device to a KNX system

holandêsinglês
giragira
wordenis
qq

NL De KNX module wordt gevoed via de KNX leiding. Het apparaat is achterwaarts compatibel en kan daardoor ook voor de Gira rookmelders Dual/VdS worden gebruikt.Gira rookmelder Dual Q

EN The KNX module is supplied with electricity via the KNX line. The device has backwards compatibility and can therefore be used for Gira Dual/VdS smoke alarm devices too. Gira Dual Q smoke alarm device

holandêsinglês
knxknx
modulemodule
kancan
giragira
dualdual
qq

NL Met de Gira KNX-module kan de Gira rookmelder Dual Q in een KNX-systeem worden geïntegreerd

EN The Gira KNX module enables the Gira Dual Q smoke alarm device to be connected to a KNX system

holandêsinglês
giragira
kanenables
qq

NL Met de Gira KNX-aanwezigheidsmelders Standard en Komfort kan, in combinatie met het Gira KNX-systeem, een automatische lichtregeling worden gerealiseerd.

EN When used in conjunction with the Gira KNX system, the Gira KNX presence detectors Standard and Komfort enable automatic lighting control.

holandêsinglês
giragira
standardstandard
automatischeautomatic
systeemsystem

NL Via een KNX/IP gateway kan de hele KNX installatie gevisualiseerd worden in Homey

EN Homey can visualize the entire KNX installation when connected to a simple KNX/IP gateway

holandêsinglês
viawhen
knxknx
ipip
kancan
heleentire
installatieinstallation
homeyhomey

NL Dealer zoeken: hier vindt u elektriciens, KNX specialisten en systeemintegratoren voor het KNX systeem

EN Dealer search: Electricians, KNX specialists and system integrators can be found here.

holandêsinglês
dealerdealer
zoekensearch
hierhere
vindtfound
knxknx
specialistenspecialists
systeemsystem

NL Bovendien kunnen de parameters van de KNX installatie worden ingesteld door middel van de ETS en de Gira X1 als KNX interface.

EN The KNX system can also be configured using ETS and the Gira X1 as a KNX interface.

holandêsinglês
knxknx
installatiesystem
ingesteldconfigured
giragira
interfaceinterface

NL De Gira KNX tastsensor 3 is een bedieningseenheid voor het KNX systeem

EN The Gira KNX pushbutton sensor 3 is an operation unit for the KNX system

holandêsinglês
giragira
knxknx
systeemsystem

NL Bovendien kunnen de parameters van de KNX installatie worden ingesteld door middel van de ETS en de Gira X1 als KNX interface.

EN The KNX system can also be configured using ETS and the Gira X1 as a KNX interface.

holandêsinglês
knxknx
installatiesystem
ingesteldconfigured
giragira
interfaceinterface

NL De Gira KNX tastsensor 3 is een bedieningseenheid voor het KNX systeem

EN The Gira KNX pushbutton sensor 3 is an operation unit for the KNX system

holandêsinglês
giragira
knxknx
systeemsystem

NL Dealer zoeken: hier vindt u elektriciens, KNX specialisten en systeemintegratoren voor het KNX systeem

EN Dealer search: Electricians, KNX specialists and system integrators can be found here.

holandêsinglês
dealerdealer
zoekensearch
hierhere
vindtfound
knxknx
specialistenspecialists
systeemsystem

NL Gira KNX bewegingsmelders dienen voor de besturing van verschillende functies afhankelijk van de bewegingen van personen. Hij zendt vervolgens een schakelcommando aan het KNX systeem en activeert zo diverse, individueel vooraf ingestelde acties.

EN Gira KNX motion detectors are used for the on-demand control of different functions depending on the movements of people. Accordingly, it sends a switching command to the KNX system and thereby triggers various individually preset actions.

holandêsinglês
giragira
knxknx
bewegingsmeldersmotion detectors
besturingcontrol
functiesfunctions
personenpeople
zendtsends
systeemsystem
actiesactions

NL Met de KNX RF handzenders wordt de besturing mobiel: vanaf elke plek in huis kan de gewenste KNX functie comfortabel via de afstandsbediening worden geactiveerd.

EN KNX RF hand-held transmitters mean that you are in control wherever you are: The desired KNX function can be conveniently activated by remote control from any point in the building.

holandêsinglês
knxknx
besturingcontrol
gewenstedesired
functiefunction
comfortabelconveniently
geactiveerdactivated
rfrf

NL Met de Gira KNX aanwezigheidsmelders kan, in combinatie met het Gira KNX systeem, een automatische licht- en klimaatregeling worden gerealiseerd.

EN Together with the Gira KNX system, the Gira KNX presence detector allows automatic lighting and air conditioning control.

holandêsinglês
giragira
knxknx
systeemsystem
automatischeautomatic
lichtlighting

NL De Gira KNX drukcontact-busaankoppelaars vormen de interface tussen het KNX systeem en de gebruiker. De robuuste apparaten zijn bedoeld voor gebruik in objecten waaraan bijzondere eisen worden gesteld.

EN The Gira KNX bus coupler buttons provide the interface between the KNX system and the user. The extremely robust devices are ideal for use in properties with particular requirements.

holandêsinglês
giragira
knxknx
interfaceinterface
robuusterobust
bijzondereparticular
eisenrequirements

NL De Gira KNX CO₂-sensor bewaakt betrouwbaar temperatuur, luchtvochtigheid en CO₂-concentratie in gebouwen en stuurt binnen het KNX systeem gerichte maatregelen aan voor behoud van de kwaliteit van het binnenklimaat.

EN The Gira KNX CO₂ sensor reliably monitors the temperature, humidity and CO₂ concentration in buildings, and it controls targeted measures in the KNX system for maintaining the indoor climate.

holandêsinglês
giragira
knxknx
coco
bewaaktmonitors
betrouwbaarreliably
temperatuurtemperature
luchtvochtigheidhumidity
gebouwenbuildings
systeemsystem
gerichtetargeted
maatregelenmeasures
sensorsensor
concentratieconcentration

NL Het Gira KNX weerstation Plus meet negen verschillende meteorologische parameters en geeft deze door aan het KNX systeem via de geïntegreerde busaankoppeling

EN The Gira KNX weather station Plus measures nine different meteorological parameters and makes them available to the KNX system via the integrated bus coupler

holandêsinglês
giragira
knxknx
parametersparameters
systeemsystem
geïntegreerdeintegrated

NL De Gira KNX ingangsmodules en drukcontactinterfaces zijn bedoeld om conventionele sensoren te integreren in het KNX systeem

EN The Gira KNX input modules and button interfaces serve to integrate conventional sensors in the KNX

holandêsinglês
giragira
knxknx
conventioneleconventional
sensorensensors

NL De bereik-/lijnkoppelaar verbindt datatechnisch twee KNX lijnen met elkaar en zorgt voor galvanische scheiding tussen deze lijnen. Daardoor kan elke buslijn van een KNX installatie elektrisch onafhankelijk van de andere lijnen worden gebruikt.

EN The area/line coupler connects two KNX lines to each other for data transfer and ensures electrical isolation between these lines. As a result, each bus line of a KNX installation can be electrically operated independently of the other lines.

holandêsinglês
verbindtconnects
knxknx
installatieinstallation
onafhankelijkindependently
gebruiktoperated

NL De Gira KNX IP-interface is bedoeld om een pc aan KNX componenten te koppelen voor adressering, programmering en diagnose binnen het systeem. De aansluiting op het datanetwerk vindt plaats met RJ45-bussen.

EN The Gira KNX IP interface is used to connect a PC to KNX components for addressing, programming, and diagnostics within the system. Connection to the data network is via RJ45 pin jacks.

holandêsinglês
giragira
knxknx
pcpc
componentencomponents
interfaceinterface

Mostrando 50 de 50 traduções