Traduzir "menu command tools" para holandês

Mostrando 50 de 50 traduções da frase "menu command tools" de inglês para holandês

Tradução de inglês para holandês de menu command tools

inglês
holandês

EN This is possible by defining three levels of command sets within the modem, the basic command set, the extended command set and the proprietary command set.

NL Dit is mogelijk door het definiëren van drie niveaus van commando?s in het modem, de basis commando set, de uitgebreide commando set en de merkspecifieke commando set.

inglêsholandês
possiblemogelijk
levelsniveaus
commandcommando
modemmodem
extendeduitgebreide
isis
definingdefiniëren
thede
threedrie
basicbasis
setset
thisdit
bydoor
anden
ofvan

EN This is possible by defining three levels of command sets within the modem, the basic command set, the extended command set and the proprietary command set.

NL Dit is mogelijk door het definiëren van drie niveaus van commando?s in het modem, de basis commando set, de uitgebreide commando set en de merkspecifieke commando set.

inglêsholandês
possiblemogelijk
levelsniveaus
commandcommando
modemmodem
extendeduitgebreide
isis
definingdefiniëren
thede
threedrie
basicbasis
setset
thisdit
bydoor
anden
ofvan

EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.

NL Opdrachtregelinterface – Gebruik de tools van de opdrachtregelinterface om Parallels Desktop en VM's, inclusief instellingen en configuratie, te beheren. Met de opdrachtregelinterface zijn ook aanvullende integraties mogelijk, zoals Vagrant.

EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.

NL Opdrachtregelinterface – Gebruik de tools van de opdrachtregelinterface om Parallels Desktop en VM's, inclusief instellingen en configuratie, te beheren. Met de opdrachtregelinterface zijn ook aanvullende integraties mogelijk, zoals Vagrant.

EN Then add it to FreeOffice by choosing the ribbon command File | Options or the menu command Tools > Options, switching to the Language tab and clicking on the Hunspell dictionaries button.

NL Voeg deze daarna toe aan FreeOffice door te kiezen voor de lint-opdracht Bestand | Opties, of de opdracht Hulpmiddelen > Opties dan het tabblad Taal te selecteren en te klikken op de knop voor Hunspell-woordenlijsten.

inglêsholandês
addvoeg
ribbonlint
commandopdracht
filebestand
toolshulpmiddelen
gtgt
optionsopties
orof
tabtabblad
thede
choosingkiezen
onop
totoe
buttonknop
bydoor
clickingklikken
languagetaal
anden

EN Then add it to FreeOffice by choosing the ribbon command File | Options or the menu command Tools > Options, switching to the Language tab and clicking on the Hunspell dictionaries button.

NL Voeg deze daarna toe aan FreeOffice door te kiezen voor de lint-opdracht Bestand | Opties, of de opdracht Hulpmiddelen > Opties dan het tabblad Taal te selecteren en te klikken op de knop voor Hunspell-woordenlijsten.

inglêsholandês
addvoeg
ribbonlint
commandopdracht
filebestand
toolshulpmiddelen
gtgt
optionsopties
orof
tabtabblad
thede
choosingkiezen
onop
totoe
buttonknop
bydoor
clickingklikken
languagetaal
anden

EN Tags:best ddos tools, ddos attacks tools, DDOS Detection Tools, DDOS Mitigation Tools, DDOS Prevention Tools, ddos tools, tools for ddos attacks

NL Tags: beste ddos-tools, ddos-aanvalstools, DDOS-detectietools, DDOS Mitigation Tools, DDOS Prevention Tools, ddos-tools, tools voor ddos-aanvallen

inglêsholandês
tagstags
ddosddos
toolstools
attacksaanvallen
bestbeste
forvoor

EN During the day, we are happy to serve dishes from the somewhat smaller and simpler menu as well as our set daily menu. In the evening from 6 p.m., we recommend dishes from the dinner menu.

NL Overdag serveren wij u graag onze gerechten van de kleinere, wat eenvoudigere kaart en ons dagmenu. ?s Avonds vanaf 18 uur bevelen wij u onze gerechten van de avondkaart aan.

inglêsholandês
serveserveren
smallerkleinere
menukaart
eveningavonds
thede
wewij
dishesgerechten
tovanaf
anden
ouronze

EN Access the Develop Menu by selecting “Software Development” as your VM profile, or by enabling “Show Developer Tools” in your VM configuration. From the menu bar, select Develop> and choose from the following tools.

NL Open het menu Ontwikkelen door 'Softwareontwikkeling' te selecteren als je VM-profiel of door 'Ontwikkeltools weergeven' in te schakelen in je VM-configuratie. Selecteer in de menubalk de optie Ontwikkelen > en kies uit de volgende tools.

inglêsholandês
software developmentsoftwareontwikkeling
showweergeven
followingvolgende
toolstools
thede
inin
orof
anden
asals
menumenu
developontwikkelen
choosekies
bydoor
selectselecteer
selectingselecteren
fromuit

EN Access the Develop Menu by selecting “Software Development” as your VM profile, or by enabling “Show Developer Tools” in your VM configuration. From the menu bar, select Develop> and choose from the following tools.

NL Open het menu Ontwikkelen door 'Softwareontwikkeling' te selecteren als je VM-profiel of door 'Ontwikkeltools weergeven' in te schakelen in je VM-configuratie. Selecteer in de menubalk de optie Ontwikkelen > en kies uit de volgende tools.

inglêsholandês
software developmentsoftwareontwikkeling
showweergeven
followingvolgende
toolstools
thede
inin
orof
anden
asals
menumenu
developontwikkelen
choosekies
bydoor
selectselecteer
selectingselecteren
fromuit

EN I would highly recommend the Data Science at the Command Line workshop to anyone that is interested in either kickstarting their command-line experiences or improving their data science with Unix power tools.

NL Ik zou de Data Science at the Command Line-workshop ten zeerste aanbevelen aan iedereen die geïnteresseerd is in het verbeteren van hun data science vaardigheden met Unix power tools.

inglêsholandês
recommendaanbevelen
commandcommand
workshopworkshop
interestedgeïnteresseerd
improvingverbeteren
unixunix
powerpower
toolstools
iik
datadata
sciencescience
atat
isis
inin
thede
wouldzou
lineline
theirhun
withmet
toaan

EN Linux employs a command line whereas Windows does not (well, technically, Windows does have a command line, but it requires extra steps to access it).

NL Linux heeft een opdrachtregel in terwijl Windows niet (goed, technisch gezien Windows geen opdrachtregel heeft, maar het vereist extra stappen om er toegang toe te hebben).

inglêsholandês
linuxlinux
windowswindows
wellgoed
accesstoegang
requiresvereist
toom
aeen
havehebben
extraextra
stepsstappen
technicallytechnisch
but
itmaar

EN Type in command: pnputil -e >list.txt  and press enter. This creates a list.txt to the folder where you ran the command

NL Typ het commando: pnputil -e> list.txt en druk op invoeren. Hiermee wordt een list.txt gemaakt naar de map waarin u de opdracht hebt uitgevoerd.

inglêsholandês
gtgt
txttxt
createsgemaakt
foldermap
thede
commandopdracht
pressdruk
anden
tonaar
youu

EN There will be an option to set up the daily cron job on this page, followed by a PHP command to use. To do so, Copy the command under step three (3) that begins with PHP -q

NL Er is een optie om de dagelijkse cron-taak op deze pagina in te stellen, gevolgd door een PHP-opdracht om te gebruiken.Om dit te doen, kopieert u de opdracht onder stap drie (3) die begint met PHP -Q

inglêsholandês
dailydagelijkse
followedgevolgd
phpphp
beginsbegint
pagepagina
commandopdracht
thede
toom
usegebruiken
bydoor
optionoptie
jobtaak
stepstap
threedrie
onop
thatdie
thereer
dodoen
thisdit

EN In the Add New, Cron Job area, click on the Common Settings dropdown and select the Once Per Five Minutes option. In the Command field, paste the PHP command you copied earlier and press the blue Add New Cron Job button.

NL Klik in het veld Nieuw, Cron toevoegen op de vervolgkeuzelijst Common Settings en selecteer de optie één keer per vijf minuten.Plak in het veld Commando de PHP-opdracht die u eerder hebt gekopieerd en druk op de blauwe knop Voeg nieuwe cron-taak toe.

inglêsholandês
commoncommon
minutesminuten
fieldveld
phpphp
copiedgekopieerd
inin
optionoptie
thede
onop
settingssettings
buttonknop
clickklik
fivevijf
commandopdracht
selectselecteer
jobtaak
pressdruk
anden
perper
newnieuw
oncekeer
youu

EN Before moving on, you'll want to enable Nginx to start on bootup. That way, you do not have to retype the above command each time the server starts. You can do so by entering the following command:

NL Voordat u verder gaat, wilt u NGINX inschakelen om op Boot-up te starten.Op die manier hoeft u de bovenstaande opdracht niet telkens weer te geven telkens wanneer de server start.U kunt dit doen door de volgende opdracht in te voeren:

inglêsholandês
nginxnginx
waymanier
serverserver
thede
onop
wantwilt
toom
bydoor
commandopdracht
beforevoordat
dodoen
canhoeft
you cankunt
followingvolgende
startstart
youu
eachin

EN For enabling the PHP service to start automatically, so you don't have to type the command above every time the server restarts, use this command here:

NL Om de PHP-service in staat te stellen automatisch te starten, dus u hoeft niet de bovenstaande opdracht te typen telkens wanneer de server opnieuw wordt opgestart, deze opdracht hier gebruikt:

inglêsholandês
phpphp
automaticallyautomatisch
commandopdracht
usegebruikt
serviceservice
serverserver
thede
have tohoeft
toom
sodus
dontniet
thisdeze
typetypen
herehier
startstarten
youu

EN Bash command aliases allow you to create your own commands or use certain flags for commands on standard command invocation

NL Met Bash-opdrachtaliassen kunt u uw eigen opdrachten maken of bepaalde vlaggen gebruiken voor opdrachten bij het aanroepen van standaardopdrachten

inglêsholandês
flagsvlaggen
orof
usegebruiken
youu
youruw
owneigen
forvoor
certainbepaalde

EN \$? - The previous command's exit code. This will update after each command is run.

NL \ $?- de exitcode van de vorige opdracht.Dit wordt bijgewerkt nadat elke opdracht wordt uitgevoerd.

inglêsholandês
updatebijgewerkt
commandopdracht
thede
eachelke
previousvorige
afternadat
iswordt
thisdit

EN Send command line or terminal commands to a remote Windows or Mac computer’s command prompt in the background. Available as a 1-to-Many action.

NL Verzend opdrachtregel- of terminalopdrachten naar de opdrachtprompt van een externe Windows- of Mac-computer op de achtergrond. Beschikbaar als een-op-veel-actie.

inglêsholandês
remoteexterne
windowswindows
backgroundachtergrond
availablebeschikbaar
actionactie
orof
macmac
thede
sendverzend
asals
lineop
computerscomputer
aeen
tonaar

EN Start one of the FreeOffice applications, click on the "?" icon in the ribbon and choose the command Check for updates. If you are running FreeOffice in classic mode with menus, choose the command Help > Check for updates.

NL Start een van de FreeOffice-toepassingen, klik op het pictogram “?” in het lint en kies de opdracht Controleer op updates. In de klassieke modus van FreeOffice met menu's ga je naar de opdracht Help > Controleer op updates.

inglêsholandês
startstart
applicationstoepassingen
iconpictogram
ribbonlint
commandopdracht
checkcontroleer
updatesupdates
classicklassieke
modemodus
helphelp
gtgt
clickklik
choosekies
ofvan
inin
onop
anden

EN Start SSH SessionQuickly start an SSH session with your VM. This command requires an SSH server running on your VM; calls 'ssh <vm_ip>' command in Terminal.

NL SSH-sessie startenStart snel een SSH-sessie met je VM. Voor deze opdracht is een SSH-server vereist die wordt uitgevoerd op je VM en die de opdracht 'ssh <vm_ip>' oproept in Terminal.

inglêsholandês
sshssh
sessionsessie
vmvm
commandopdracht
requiresvereist
serverserver
gtgt
terminalterminal
ltlt
yourje
inin
thisdeze
onop

EN Switching from command mode to data mode was easy, a control command could be used for this

NL Het schakelen van commando mode naar data mode was eenvoudig , een controle commando kon hiervoor worden gebruikt

inglêsholandês
switchingschakelen
modemode
datadata
easyeenvoudig
usedgebruikt
for thishiervoor
controlcontrole
commandcommando
beworden
aeen
tonaar

EN The only exceptions of this rule are ?+++? to switch from data mode to command mode and ?A/? to repeat the previous command.

NL De enige uitzonderingen op deze regel zijn ?+++? waarmee van data mode naar commando mode wordt overgeschakeld, en ?A/? om het vorige commando te herhalen.

inglêsholandês
exceptionsuitzonderingen
datadata
modemode
commandcommando
repeatherhalen
previousvorige
aa
thede
toom
ruleregel
anden
ofvan
thisdeze
arezijn

EN The ATZ command, used to reset the modem should be followed by a pause of at least two seconds before the next command is entered.

NL Het ATZ commando om het modem te resetten moet gevolgd worden door een pauze van tenminste twee seconden voor het volgende commando wordt ingevoerd.

inglêsholandês
commandcommando
resetresetten
modemmodem
shouldmoet
followedgevolgd
pausepauze
enteredingevoerd
toom
secondsseconden
at leasttenminste
atte
bydoor
beworden
thewordt
ofvan
twotwee

EN The command returns ?OK? if the speaker could be set to the requested volume, and ?ERROR? if the command fails.

NL Het commando retourneert ?OK? wanneer de speaker op het gewenste volume kon worden ingesteld, en ?ERROR? bij een fout in de uitvoering.

inglêsholandês
commandcommando
okok
speakerspeaker
volumevolume
thede
beworden
errorfout
set toingesteld
anden
towanneer

EN The new definition allowed to use only the SOH to send a fixed length command, without the need to end the command with a trailing control code

NL De nieuwe definitie liet ook de mogelijkheid toe om alleen de SOH te gebruiken om een commando met een vaste lengte te versturen, zonder de noodzaak van een eindcode

inglêsholandês
definitiondefinitie
fixedvaste
lengthlengte
neednoodzaak
newnieuwe
thede
usegebruiken
commandcommando
toom
withoutzonder
to sendversturen
aeen

EN Command line programmes are useful for many applications and can save you a lot of work. Today I will introduce you to a very helpful command line programme for WordPress : WP-CLI.

NL Opdrachtregelprogramma's zijn nuttig voor vele toepassingen en kunnen u veel werk besparen. Vandaag zal ik jullie introduceren aan een zeer nuttig opdrachtregelprogramma voor WordPress : WP-CLI.

inglêsholandês
applicationstoepassingen
savebesparen
workwerk
introduceintroduceren
iik
veryzeer
wordpresswordpress
willzal
todayvandaag
anden
youjullie
usefulnuttig
forvoor
aeen
arezijn

EN Switching from command mode to data mode was easy, a control command could be used for this

NL Het schakelen van commando mode naar data mode was eenvoudig , een controle commando kon hiervoor worden gebruikt

inglêsholandês
switchingschakelen
modemode
datadata
easyeenvoudig
usedgebruikt
for thishiervoor
controlcontrole
commandcommando
beworden
aeen
tonaar

EN The only exceptions of this rule are ?+++? to switch from data mode to command mode and ?A/? to repeat the previous command.

NL De enige uitzonderingen op deze regel zijn ?+++? waarmee van data mode naar commando mode wordt overgeschakeld, en ?A/? om het vorige commando te herhalen.

inglêsholandês
exceptionsuitzonderingen
datadata
modemode
commandcommando
repeatherhalen
previousvorige
aa
thede
toom
ruleregel
anden
ofvan
thisdeze
arezijn

EN The ATZ command, used to reset the modem should be followed by a pause of at least two seconds before the next command is entered.

NL Het ATZ commando om het modem te resetten moet gevolgd worden door een pauze van tenminste twee seconden voor het volgende commando wordt ingevoerd.

inglêsholandês
commandcommando
resetresetten
modemmodem
shouldmoet
followedgevolgd
pausepauze
enteredingevoerd
toom
secondsseconden
at leasttenminste
atte
bydoor
beworden
thewordt
ofvan
twotwee

EN The command returns ?OK? if the speaker could be set to the requested volume, and ?ERROR? if the command fails.

NL Het commando retourneert ?OK? wanneer de speaker op het gewenste volume kon worden ingesteld, en ?ERROR? bij een fout in de uitvoering.

inglêsholandês
commandcommando
okok
speakerspeaker
volumevolume
thede
beworden
errorfout
set toingesteld
anden
towanneer

EN The new definition allowed to use only the SOH to send a fixed length command, without the need to end the command with a trailing control code

NL De nieuwe definitie liet ook de mogelijkheid toe om alleen de SOH te gebruiken om een commando met een vaste lengte te versturen, zonder de noodzaak van een eindcode

inglêsholandês
definitiondefinitie
fixedvaste
lengthlengte
neednoodzaak
newnieuwe
thede
usegebruiken
commandcommando
toom
withoutzonder
to sendversturen
aeen

EN Send command line or terminal commands to a remote Windows or Mac computer’s command prompt in the background. Available as a 1-to-Many action.

NL Verzend opdrachtregel- of terminalopdrachten naar de opdrachtprompt van een externe Windows- of Mac-computer op de achtergrond. Beschikbaar als een-op-veel-actie.

inglêsholandês
remoteexterne
windowswindows
backgroundachtergrond
availablebeschikbaar
actionactie
orof
macmac
thede
sendverzend
asals
lineop
computerscomputer
aeen
tonaar

EN Start one of the FreeOffice applications, click on the "?" icon in the ribbon and choose the command Check for updates. If you are running FreeOffice in classic mode with menus, choose the command Help > Check for updates.

NL Start een van de FreeOffice-toepassingen, klik op het pictogram “?” in het lint en kies de opdracht Controleer op updates. In de klassieke modus van FreeOffice met menu's ga je naar de opdracht Help > Controleer op updates.

inglêsholandês
startstart
applicationstoepassingen
iconpictogram
ribbonlint
commandopdracht
checkcontroleer
updatesupdates
classicklassieke
modemodus
helphelp
gtgt
clickklik
choosekies
ofvan
inin
onop
anden

EN With the output of this command, it will tell you if the SSH server is up and Active or failed for any reason. If SSH is down on the server, the following command can be used to start it back up,

NL Met de uitvoer van deze opdracht zal het u vertellen of de SSH-server op is en Actief of om welke reden dan ook mislukt.Als SSH op de server is omlaag, kan de volgende opdracht worden gebruikt om het back-up te maken,

inglêsholandês
sshssh
activeactief
failedmislukt
reasonreden
serverserver
isis
orof
thede
toom
tellvertellen
commandopdracht
willzal
cankan
beworden
backback
back upback-up
outputuitvoer
onop
followingvolgende
usedgebruikt
ofvan
youu
ifals
anden
thisdeze

EN Start SSH SessionQuickly start an SSH session with your VM. This command requires an SSH server running on your VM; calls 'ssh <vm_ip>' command in Terminal.

NL SSH-sessie startenStart snel een SSH-sessie met je VM. Voor deze opdracht is een SSH-server vereist die wordt uitgevoerd op je VM en die de opdracht 'ssh <vm_ip>' oproept in Terminal.

inglêsholandês
sshssh
sessionsessie
vmvm
commandopdracht
requiresvereist
serverserver
gtgt
terminalterminal
ltlt
yourje
inin
thisdeze
onop

EN There will be an option to set up the daily cron job on this page, followed by a PHP command to use. To do so, Copy the command under step three (3) that begins with PHP -q

NL Er is een optie om de dagelijkse cron-taak op deze pagina in te stellen, gevolgd door een PHP-opdracht om te gebruiken.Om dit te doen, kopieert u de opdracht onder stap drie (3) die begint met PHP -Q

inglêsholandês
dailydagelijkse
followedgevolgd
phpphp
beginsbegint
pagepagina
commandopdracht
thede
toom
usegebruiken
bydoor
optionoptie
jobtaak
stepstap
threedrie
onop
thatdie
thereer
dodoen
thisdit

EN In the Add New, Cron Job area, click on the Common Settings dropdown and select the Once Per Five Minutes option. In the Command field, paste the PHP command you copied earlier and press the blue Add New Cron Job button.

NL Klik in het veld Nieuw, Cron toevoegen op de vervolgkeuzelijst Common Settings en selecteer de optie één keer per vijf minuten.Plak in het veld Commando de PHP-opdracht die u eerder hebt gekopieerd en druk op de blauwe knop Voeg nieuwe cron-taak toe.

inglêsholandês
commoncommon
minutesminuten
fieldveld
phpphp
copiedgekopieerd
inin
optionoptie
thede
onop
settingssettings
buttonknop
clickklik
fivevijf
commandopdracht
selectselecteer
jobtaak
pressdruk
anden
perper
newnieuw
oncekeer
youu

EN 2. Confirm that the hwagent command is available (the sudo command is not necessary if you're the root user).

NL 2. Bevestig dat de opdracht HwAgent beschikbaar is (de sudo -opdracht is niet nodig als u de rootgebruiker bent).

inglêsholandês
confirmbevestig
hwagenthwagent
commandopdracht
necessarynodig
isis
thede
availablebeschikbaar
ifals
thatdat

EN Before moving on, you'll want to enable Nginx to start on bootup. That way, you do not have to retype the above command each time the server starts. You can do so by entering the following command:

NL Voordat u verder gaat, wilt u NGINX inschakelen om op Boot-up te starten.Op die manier hoeft u de bovenstaande opdracht niet telkens weer te geven telkens wanneer de server start.U kunt dit doen door de volgende opdracht in te voeren:

inglêsholandês
nginxnginx
waymanier
serverserver
thede
onop
wantwilt
toom
bydoor
commandopdracht
beforevoordat
dodoen
canhoeft
you cankunt
followingvolgende
startstart
youu
eachin

EN For enabling the PHP service to start automatically, so you don't have to type the command above every time the server restarts, use this command here:

NL Om de PHP-service in staat te stellen automatisch te starten, dus u hoeft niet de bovenstaande opdracht te typen telkens wanneer de server opnieuw wordt opgestart, deze opdracht hier gebruikt:

inglêsholandês
phpphp
automaticallyautomatisch
commandopdracht
usegebruikt
serviceservice
serverserver
thede
have tohoeft
toom
sodus
dontniet
thisdeze
typetypen
herehier
startstarten
youu

EN Bash command aliases allow you to create your own commands or use certain flags for commands on standard command invocation

NL Met Bash-opdrachtaliassen kunt u uw eigen opdrachten maken of bepaalde vlaggen gebruiken voor opdrachten bij het aanroepen van standaardopdrachten

inglêsholandês
flagsvlaggen
orof
usegebruiken
youu
youruw
owneigen
forvoor
certainbepaalde

EN \$? - The previous command's exit code. This will update after each command is run.

NL \ $?- de exitcode van de vorige opdracht.Dit wordt bijgewerkt nadat elke opdracht wordt uitgevoerd.

inglêsholandês
updatebijgewerkt
commandopdracht
thede
eachelke
previousvorige
afternadat
iswordt
thisdit

EN Tell Git to track your new locations.txt file using the git add command. Just like when you created a file, the git add command doesn't return anything when you enter it correctly.

NL Geef Git opdracht om je nieuwe bestand locations.txt te volgen met behulp van de opdracht git add. De opdracht git add retourneert niets wanneer je het correct invoert, net als toen je een bestand aanmaakte.

inglêsholandês
gitgit
newnieuwe
addadd
commandopdracht
correctlycorrect
yourje
thede
toom
txttxt
filebestand
trackvolgen
ithet
entereen

EN The git pull command merges the file from your remote repository (Bitbucket) into your local repository with a single command.

NL Met de opdracht git pull wordt het bestand van je externe repository (Bitbucket) in één keer samengevoegd in je lokale repository.

inglêsholandês
gitgit
commandopdracht
remoteexterne
bitbucketbitbucket
locallokale
pullpull
filebestand
yourje
repositoryrepository
thede
withmet
intoin
akeer

EN Open a Command Prompt (or Git Bash if during installation you elected not to use Git from the Windows Command Prompt).

NL Open een opdrachtprompt (of Git Bash als je tijdens de installatie ervoor hebt gekozen om Git niet te gebruiken via de Windows-opdrachtprompt).

inglêsholandês
gitgit
installationinstallatie
electedgekozen
windowswindows
orof
toom
thede
openopen
usegebruiken
duringtijdens
fromvia
ifals

EN Right-click in the document window and choose the relevant command from the context menu

NL Klik met de rechtermuisknop in het documentvenster en kies de relevante opdracht uit het contextmenu

inglêsholandês
commandopdracht
inin
choosekies
clickklik
thede
fromuit
relevantrelevante
anden

EN Bring up your Google Chrome browser and click on the menu resembling three horizontal lines. Click Settings once the drop down menu pops out.

NL Start je Google Chrome browser op en klik op het menu dat op de drie horizontale lijntjes lijkt. Klik op Instellingen zodat het keuze menu tevoorschijn komt.

inglêsholandês
googlegoogle
chromechrome
browserbrowser
clickklik
settingsinstellingen
yourje
thede
onop
menumenu
threedrie
anden

EN It adds an admin Toolbar menu showing an overview of the current page, with complete debugging information shown in panels once you select a menu item.

NL Het voegt een menu van de beheer toolbar toe dat een overzicht van de huidige pagina toont, met volledige fout opsporingsinformatie die in vensters wordt getoond zodra u een menu artikel selecteert.

inglêsholandês
addsvoegt
adminbeheer
menumenu
currenthuidige
selectselecteert
inin
thede
overviewoverzicht
completevolledige
showingmet
pagepagina
ofartikel
youu

Mostrando 50 de 50 traduções