Traduzir "specified command" para holandês

Mostrando 50 de 50 traduções da frase "specified command" de inglês para holandês

Tradução de inglês para holandês de specified command

inglês
holandês

EN This is possible by defining three levels of command sets within the modem, the basic command set, the extended command set and the proprietary command set.

NL Dit is mogelijk door het definiëren van drie niveaus van commando?s in het modem, de basis commando set, de uitgebreide commando set en de merkspecifieke commando set.

inglêsholandês
possiblemogelijk
levelsniveaus
commandcommando
modemmodem
extendeduitgebreide
isis
definingdefiniëren
thede
threedrie
basicbasis
setset
thisdit
bydoor
anden
ofvan

EN This is possible by defining three levels of command sets within the modem, the basic command set, the extended command set and the proprietary command set.

NL Dit is mogelijk door het definiëren van drie niveaus van commando?s in het modem, de basis commando set, de uitgebreide commando set en de merkspecifieke commando set.

inglêsholandês
possiblemogelijk
levelsniveaus
commandcommando
modemmodem
extendeduitgebreide
isis
definingdefiniëren
thede
threedrie
basicbasis
setset
thisdit
bydoor
anden
ofvan

EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.

NL Opdrachtregelinterface – Gebruik de tools van de opdrachtregelinterface om Parallels Desktop en VM's, inclusief instellingen en configuratie, te beheren. Met de opdrachtregelinterface zijn ook aanvullende integraties mogelijk, zoals Vagrant.

EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.

NL Opdrachtregelinterface – Gebruik de tools van de opdrachtregelinterface om Parallels Desktop en VM's, inclusief instellingen en configuratie, te beheren. Met de opdrachtregelinterface zijn ook aanvullende integraties mogelijk, zoals Vagrant.

EN Internally, the git checkout command simply updates the HEAD to point to either the specified branch or commit

NL Intern werkt de git-checkoutopdracht eenvoudig de HEAD bij, zodat deze naar de opgegeven branch of commit verwijst

inglêsholandês
internallyintern
gitgit
simplyeenvoudig
headhead
specifiedopgegeven
branchbranch
tozodat
orof
thede

EN Opens up the manual to display helpful information for a specified command : man

NL Opent de handleiding om nuttige informatie weer te geven voor een opgegeven opdracht: Man

inglêsholandês
manualhandleiding
helpfulnuttige
informationinformatie
specifiedopgegeven
commandopdracht
toom
thede
opensopent
forvoor
manman

EN If your client is configured correctly, it will automatically create a webhook config using the URL specified in the command and set it as the currently in-use key's default webhook config.

NL Als uw client correct is geconfigureerd, maakt deze automatisch een webhook-configuratie met behulp van de URL die is opgegeven in de opdracht en wordt deze ingesteld als de standaard webhook-configuratie van de sleutel die momenteel wordt gebruikt.

inglêsholandês
correctlycorrect
automaticallyautomatisch
webhookwebhook
specifiedopgegeven
currentlymomenteel
keyssleutel
defaultstandaard
isis
configuredgeconfigureerd
urlurl
inin
commandopdracht
thede
clientclient
aeen
usegebruikt
willwordt
anden

EN Internally, the git checkout command simply updates the HEAD to point to either the specified branch or commit

NL Intern werkt de git-checkoutopdracht simpelweg de HEAD bij, zodat deze naar de opgegeven branch of commit verwijst

inglêsholandês
internallyintern
gitgit
simplysimpelweg
headhead
specifiedopgegeven
branchbranch
tozodat
orof
thede

EN The command returns ?OK? in normal cases and ?ERROR? when a parameter other than 0 or 1 was specified.

NL Normaliter wordt ?OK? teruggegevenen ERROR, wanneer de parameter een waarde anders dan ?0? of ?1? representeert.

inglêsholandês
okok
errorerror
parameterparameter
orof
thede
otheranders
whenwanneer

EN Internally, the git checkout command simply updates the HEAD to point to either the specified branch or commit

NL Intern werkt de git-checkoutopdracht simpelweg de HEAD bij, zodat deze naar de opgegeven branch of commit verwijst

inglêsholandês
internallyintern
gitgit
simplysimpelweg
headhead
specifiedopgegeven
branchbranch
tozodat
orof
thede

EN The command returns ?OK? in normal cases and ?ERROR? when a parameter other than 0 or 1 was specified.

NL Normaliter wordt ?OK? teruggegevenen ERROR, wanneer de parameter een waarde anders dan ?0? of ?1? representeert.

inglêsholandês
okok
errorerror
parameterparameter
orof
thede
otheranders
whenwanneer

EN Internally, the git checkout command simply updates the HEAD to point to either the specified branch or commit

NL Intern werkt de git-checkoutopdracht eenvoudig de HEAD bij, zodat deze naar de opgegeven branch of commit verwijst

inglêsholandês
internallyintern
gitgit
simplyeenvoudig
headhead
specifiedopgegeven
branchbranch
tozodat
orof
thede

EN Opens up the manual to display helpful information for a specified command : man

NL Opent de handleiding om nuttige informatie weer te geven voor een opgegeven opdracht: Man

inglêsholandês
manualhandleiding
helpfulnuttige
informationinformatie
specifiedopgegeven
commandopdracht
toom
thede
opensopent
forvoor
manman

EN If your client is configured correctly, it will automatically create a webhook config using the URL specified in the command and set it as the currently in-use key's default webhook config.

NL Als uw client correct is geconfigureerd, maakt deze automatisch een webhook-configuratie met behulp van de URL die is opgegeven in de opdracht en wordt deze ingesteld als de standaard webhook-configuratie van de sleutel die momenteel wordt gebruikt.

inglêsholandês
correctlycorrect
automaticallyautomatisch
webhookwebhook
specifiedopgegeven
currentlymomenteel
keyssleutel
defaultstandaard
isis
configuredgeconfigureerd
urlurl
inin
commandopdracht
thede
clientclient
aeen
usegebruikt
willwordt
anden

EN Linux employs a command line whereas Windows does not (well, technically, Windows does have a command line, but it requires extra steps to access it).

NL Linux heeft een opdrachtregel in terwijl Windows niet (goed, technisch gezien Windows geen opdrachtregel heeft, maar het vereist extra stappen om er toegang toe te hebben).

inglêsholandês
linuxlinux
windowswindows
wellgoed
accesstoegang
requiresvereist
toom
aeen
havehebben
extraextra
stepsstappen
technicallytechnisch
but
itmaar

EN Type in command: pnputil -e >list.txt  and press enter. This creates a list.txt to the folder where you ran the command

NL Typ het commando: pnputil -e> list.txt en druk op invoeren. Hiermee wordt een list.txt gemaakt naar de map waarin u de opdracht hebt uitgevoerd.

inglêsholandês
gtgt
txttxt
createsgemaakt
foldermap
thede
commandopdracht
pressdruk
anden
tonaar
youu

EN There will be an option to set up the daily cron job on this page, followed by a PHP command to use. To do so, Copy the command under step three (3) that begins with PHP -q

NL Er is een optie om de dagelijkse cron-taak op deze pagina in te stellen, gevolgd door een PHP-opdracht om te gebruiken.Om dit te doen, kopieert u de opdracht onder stap drie (3) die begint met PHP -Q

inglêsholandês
dailydagelijkse
followedgevolgd
phpphp
beginsbegint
pagepagina
commandopdracht
thede
toom
usegebruiken
bydoor
optionoptie
jobtaak
stepstap
threedrie
onop
thatdie
thereer
dodoen
thisdit

EN In the Add New, Cron Job area, click on the Common Settings dropdown and select the Once Per Five Minutes option. In the Command field, paste the PHP command you copied earlier and press the blue Add New Cron Job button.

NL Klik in het veld Nieuw, Cron toevoegen op de vervolgkeuzelijst Common Settings en selecteer de optie één keer per vijf minuten.Plak in het veld Commando de PHP-opdracht die u eerder hebt gekopieerd en druk op de blauwe knop Voeg nieuwe cron-taak toe.

inglêsholandês
commoncommon
minutesminuten
fieldveld
phpphp
copiedgekopieerd
inin
optionoptie
thede
onop
settingssettings
buttonknop
clickklik
fivevijf
commandopdracht
selectselecteer
jobtaak
pressdruk
anden
perper
newnieuw
oncekeer
youu

EN Before moving on, you'll want to enable Nginx to start on bootup. That way, you do not have to retype the above command each time the server starts. You can do so by entering the following command:

NL Voordat u verder gaat, wilt u NGINX inschakelen om op Boot-up te starten.Op die manier hoeft u de bovenstaande opdracht niet telkens weer te geven telkens wanneer de server start.U kunt dit doen door de volgende opdracht in te voeren:

inglêsholandês
nginxnginx
waymanier
serverserver
thede
onop
wantwilt
toom
bydoor
commandopdracht
beforevoordat
dodoen
canhoeft
you cankunt
followingvolgende
startstart
youu
eachin

EN For enabling the PHP service to start automatically, so you don't have to type the command above every time the server restarts, use this command here:

NL Om de PHP-service in staat te stellen automatisch te starten, dus u hoeft niet de bovenstaande opdracht te typen telkens wanneer de server opnieuw wordt opgestart, deze opdracht hier gebruikt:

inglêsholandês
phpphp
automaticallyautomatisch
commandopdracht
usegebruikt
serviceservice
serverserver
thede
have tohoeft
toom
sodus
dontniet
thisdeze
typetypen
herehier
startstarten
youu

EN Bash command aliases allow you to create your own commands or use certain flags for commands on standard command invocation

NL Met Bash-opdrachtaliassen kunt u uw eigen opdrachten maken of bepaalde vlaggen gebruiken voor opdrachten bij het aanroepen van standaardopdrachten

inglêsholandês
flagsvlaggen
orof
usegebruiken
youu
youruw
owneigen
forvoor
certainbepaalde

EN \$? - The previous command's exit code. This will update after each command is run.

NL \ $?- de exitcode van de vorige opdracht.Dit wordt bijgewerkt nadat elke opdracht wordt uitgevoerd.

inglêsholandês
updatebijgewerkt
commandopdracht
thede
eachelke
previousvorige
afternadat
iswordt
thisdit

EN Send command line or terminal commands to a remote Windows or Mac computer’s command prompt in the background. Available as a 1-to-Many action.

NL Verzend opdrachtregel- of terminalopdrachten naar de opdrachtprompt van een externe Windows- of Mac-computer op de achtergrond. Beschikbaar als een-op-veel-actie.

inglêsholandês
remoteexterne
windowswindows
backgroundachtergrond
availablebeschikbaar
actionactie
orof
macmac
thede
sendverzend
asals
lineop
computerscomputer
aeen
tonaar

EN Then add it to FreeOffice by choosing the ribbon command File | Options or the menu command Tools > Options, switching to the Language tab and clicking on the Hunspell dictionaries button.

NL Voeg deze daarna toe aan FreeOffice door te kiezen voor de lint-opdracht Bestand | Opties, of de opdracht Hulpmiddelen > Opties dan het tabblad Taal te selecteren en te klikken op de knop voor Hunspell-woordenlijsten.

inglêsholandês
addvoeg
ribbonlint
commandopdracht
filebestand
toolshulpmiddelen
gtgt
optionsopties
orof
tabtabblad
thede
choosingkiezen
onop
totoe
buttonknop
bydoor
clickingklikken
languagetaal
anden

EN Start one of the FreeOffice applications, click on the "?" icon in the ribbon and choose the command Check for updates. If you are running FreeOffice in classic mode with menus, choose the command Help > Check for updates.

NL Start een van de FreeOffice-toepassingen, klik op het pictogram “?” in het lint en kies de opdracht Controleer op updates. In de klassieke modus van FreeOffice met menu's ga je naar de opdracht Help > Controleer op updates.

inglêsholandês
startstart
applicationstoepassingen
iconpictogram
ribbonlint
commandopdracht
checkcontroleer
updatesupdates
classicklassieke
modemodus
helphelp
gtgt
clickklik
choosekies
ofvan
inin
onop
anden

EN Start SSH SessionQuickly start an SSH session with your VM. This command requires an SSH server running on your VM; calls 'ssh <vm_ip>' command in Terminal.

NL SSH-sessie startenStart snel een SSH-sessie met je VM. Voor deze opdracht is een SSH-server vereist die wordt uitgevoerd op je VM en die de opdracht 'ssh <vm_ip>' oproept in Terminal.

inglêsholandês
sshssh
sessionsessie
vmvm
commandopdracht
requiresvereist
serverserver
gtgt
terminalterminal
ltlt
yourje
inin
thisdeze
onop

EN I would highly recommend the Data Science at the Command Line workshop to anyone that is interested in either kickstarting their command-line experiences or improving their data science with Unix power tools.

NL Ik zou de Data Science at the Command Line-workshop ten zeerste aanbevelen aan iedereen die geïnteresseerd is in het verbeteren van hun data science vaardigheden met Unix power tools.

inglêsholandês
recommendaanbevelen
commandcommand
workshopworkshop
interestedgeïnteresseerd
improvingverbeteren
unixunix
powerpower
toolstools
iik
datadata
sciencescience
atat
isis
inin
thede
wouldzou
lineline
theirhun
withmet
toaan

EN Switching from command mode to data mode was easy, a control command could be used for this

NL Het schakelen van commando mode naar data mode was eenvoudig , een controle commando kon hiervoor worden gebruikt

inglêsholandês
switchingschakelen
modemode
datadata
easyeenvoudig
usedgebruikt
for thishiervoor
controlcontrole
commandcommando
beworden
aeen
tonaar

EN The only exceptions of this rule are ?+++? to switch from data mode to command mode and ?A/? to repeat the previous command.

NL De enige uitzonderingen op deze regel zijn ?+++? waarmee van data mode naar commando mode wordt overgeschakeld, en ?A/? om het vorige commando te herhalen.

inglêsholandês
exceptionsuitzonderingen
datadata
modemode
commandcommando
repeatherhalen
previousvorige
aa
thede
toom
ruleregel
anden
ofvan
thisdeze
arezijn

EN The ATZ command, used to reset the modem should be followed by a pause of at least two seconds before the next command is entered.

NL Het ATZ commando om het modem te resetten moet gevolgd worden door een pauze van tenminste twee seconden voor het volgende commando wordt ingevoerd.

inglêsholandês
commandcommando
resetresetten
modemmodem
shouldmoet
followedgevolgd
pausepauze
enteredingevoerd
toom
secondsseconden
at leasttenminste
atte
bydoor
beworden
thewordt
ofvan
twotwee

EN The command returns ?OK? if the speaker could be set to the requested volume, and ?ERROR? if the command fails.

NL Het commando retourneert ?OK? wanneer de speaker op het gewenste volume kon worden ingesteld, en ?ERROR? bij een fout in de uitvoering.

inglêsholandês
commandcommando
okok
speakerspeaker
volumevolume
thede
beworden
errorfout
set toingesteld
anden
towanneer

EN The new definition allowed to use only the SOH to send a fixed length command, without the need to end the command with a trailing control code

NL De nieuwe definitie liet ook de mogelijkheid toe om alleen de SOH te gebruiken om een commando met een vaste lengte te versturen, zonder de noodzaak van een eindcode

inglêsholandês
definitiondefinitie
fixedvaste
lengthlengte
neednoodzaak
newnieuwe
thede
usegebruiken
commandcommando
toom
withoutzonder
to sendversturen
aeen

EN Command line programmes are useful for many applications and can save you a lot of work. Today I will introduce you to a very helpful command line programme for WordPress : WP-CLI.

NL Opdrachtregelprogramma's zijn nuttig voor vele toepassingen en kunnen u veel werk besparen. Vandaag zal ik jullie introduceren aan een zeer nuttig opdrachtregelprogramma voor WordPress : WP-CLI.

inglêsholandês
applicationstoepassingen
savebesparen
workwerk
introduceintroduceren
iik
veryzeer
wordpresswordpress
willzal
todayvandaag
anden
youjullie
usefulnuttig
forvoor
aeen
arezijn

EN Switching from command mode to data mode was easy, a control command could be used for this

NL Het schakelen van commando mode naar data mode was eenvoudig , een controle commando kon hiervoor worden gebruikt

inglêsholandês
switchingschakelen
modemode
datadata
easyeenvoudig
usedgebruikt
for thishiervoor
controlcontrole
commandcommando
beworden
aeen
tonaar

EN The only exceptions of this rule are ?+++? to switch from data mode to command mode and ?A/? to repeat the previous command.

NL De enige uitzonderingen op deze regel zijn ?+++? waarmee van data mode naar commando mode wordt overgeschakeld, en ?A/? om het vorige commando te herhalen.

inglêsholandês
exceptionsuitzonderingen
datadata
modemode
commandcommando
repeatherhalen
previousvorige
aa
thede
toom
ruleregel
anden
ofvan
thisdeze
arezijn

EN The ATZ command, used to reset the modem should be followed by a pause of at least two seconds before the next command is entered.

NL Het ATZ commando om het modem te resetten moet gevolgd worden door een pauze van tenminste twee seconden voor het volgende commando wordt ingevoerd.

inglêsholandês
commandcommando
resetresetten
modemmodem
shouldmoet
followedgevolgd
pausepauze
enteredingevoerd
toom
secondsseconden
at leasttenminste
atte
bydoor
beworden
thewordt
ofvan
twotwee

EN The command returns ?OK? if the speaker could be set to the requested volume, and ?ERROR? if the command fails.

NL Het commando retourneert ?OK? wanneer de speaker op het gewenste volume kon worden ingesteld, en ?ERROR? bij een fout in de uitvoering.

inglêsholandês
commandcommando
okok
speakerspeaker
volumevolume
thede
beworden
errorfout
set toingesteld
anden
towanneer

EN The new definition allowed to use only the SOH to send a fixed length command, without the need to end the command with a trailing control code

NL De nieuwe definitie liet ook de mogelijkheid toe om alleen de SOH te gebruiken om een commando met een vaste lengte te versturen, zonder de noodzaak van een eindcode

inglêsholandês
definitiondefinitie
fixedvaste
lengthlengte
neednoodzaak
newnieuwe
thede
usegebruiken
commandcommando
toom
withoutzonder
to sendversturen
aeen

EN Send command line or terminal commands to a remote Windows or Mac computer’s command prompt in the background. Available as a 1-to-Many action.

NL Verzend opdrachtregel- of terminalopdrachten naar de opdrachtprompt van een externe Windows- of Mac-computer op de achtergrond. Beschikbaar als een-op-veel-actie.

inglêsholandês
remoteexterne
windowswindows
backgroundachtergrond
availablebeschikbaar
actionactie
orof
macmac
thede
sendverzend
asals
lineop
computerscomputer
aeen
tonaar

EN Then add it to FreeOffice by choosing the ribbon command File | Options or the menu command Tools > Options, switching to the Language tab and clicking on the Hunspell dictionaries button.

NL Voeg deze daarna toe aan FreeOffice door te kiezen voor de lint-opdracht Bestand | Opties, of de opdracht Hulpmiddelen > Opties dan het tabblad Taal te selecteren en te klikken op de knop voor Hunspell-woordenlijsten.

inglêsholandês
addvoeg
ribbonlint
commandopdracht
filebestand
toolshulpmiddelen
gtgt
optionsopties
orof
tabtabblad
thede
choosingkiezen
onop
totoe
buttonknop
bydoor
clickingklikken
languagetaal
anden

EN Start one of the FreeOffice applications, click on the "?" icon in the ribbon and choose the command Check for updates. If you are running FreeOffice in classic mode with menus, choose the command Help > Check for updates.

NL Start een van de FreeOffice-toepassingen, klik op het pictogram “?” in het lint en kies de opdracht Controleer op updates. In de klassieke modus van FreeOffice met menu's ga je naar de opdracht Help > Controleer op updates.

inglêsholandês
startstart
applicationstoepassingen
iconpictogram
ribbonlint
commandopdracht
checkcontroleer
updatesupdates
classicklassieke
modemodus
helphelp
gtgt
clickklik
choosekies
ofvan
inin
onop
anden

EN With the output of this command, it will tell you if the SSH server is up and Active or failed for any reason. If SSH is down on the server, the following command can be used to start it back up,

NL Met de uitvoer van deze opdracht zal het u vertellen of de SSH-server op is en Actief of om welke reden dan ook mislukt.Als SSH op de server is omlaag, kan de volgende opdracht worden gebruikt om het back-up te maken,

inglêsholandês
sshssh
activeactief
failedmislukt
reasonreden
serverserver
isis
orof
thede
toom
tellvertellen
commandopdracht
willzal
cankan
beworden
backback
back upback-up
outputuitvoer
onop
followingvolgende
usedgebruikt
ofvan
youu
ifals
anden
thisdeze

EN Start SSH SessionQuickly start an SSH session with your VM. This command requires an SSH server running on your VM; calls 'ssh <vm_ip>' command in Terminal.

NL SSH-sessie startenStart snel een SSH-sessie met je VM. Voor deze opdracht is een SSH-server vereist die wordt uitgevoerd op je VM en die de opdracht 'ssh <vm_ip>' oproept in Terminal.

inglêsholandês
sshssh
sessionsessie
vmvm
commandopdracht
requiresvereist
serverserver
gtgt
terminalterminal
ltlt
yourje
inin
thisdeze
onop

EN There will be an option to set up the daily cron job on this page, followed by a PHP command to use. To do so, Copy the command under step three (3) that begins with PHP -q

NL Er is een optie om de dagelijkse cron-taak op deze pagina in te stellen, gevolgd door een PHP-opdracht om te gebruiken.Om dit te doen, kopieert u de opdracht onder stap drie (3) die begint met PHP -Q

inglêsholandês
dailydagelijkse
followedgevolgd
phpphp
beginsbegint
pagepagina
commandopdracht
thede
toom
usegebruiken
bydoor
optionoptie
jobtaak
stepstap
threedrie
onop
thatdie
thereer
dodoen
thisdit

EN In the Add New, Cron Job area, click on the Common Settings dropdown and select the Once Per Five Minutes option. In the Command field, paste the PHP command you copied earlier and press the blue Add New Cron Job button.

NL Klik in het veld Nieuw, Cron toevoegen op de vervolgkeuzelijst Common Settings en selecteer de optie één keer per vijf minuten.Plak in het veld Commando de PHP-opdracht die u eerder hebt gekopieerd en druk op de blauwe knop Voeg nieuwe cron-taak toe.

inglêsholandês
commoncommon
minutesminuten
fieldveld
phpphp
copiedgekopieerd
inin
optionoptie
thede
onop
settingssettings
buttonknop
clickklik
fivevijf
commandopdracht
selectselecteer
jobtaak
pressdruk
anden
perper
newnieuw
oncekeer
youu

EN 2. Confirm that the hwagent command is available (the sudo command is not necessary if you're the root user).

NL 2. Bevestig dat de opdracht HwAgent beschikbaar is (de sudo -opdracht is niet nodig als u de rootgebruiker bent).

inglêsholandês
confirmbevestig
hwagenthwagent
commandopdracht
necessarynodig
isis
thede
availablebeschikbaar
ifals
thatdat

EN Before moving on, you'll want to enable Nginx to start on bootup. That way, you do not have to retype the above command each time the server starts. You can do so by entering the following command:

NL Voordat u verder gaat, wilt u NGINX inschakelen om op Boot-up te starten.Op die manier hoeft u de bovenstaande opdracht niet telkens weer te geven telkens wanneer de server start.U kunt dit doen door de volgende opdracht in te voeren:

inglêsholandês
nginxnginx
waymanier
serverserver
thede
onop
wantwilt
toom
bydoor
commandopdracht
beforevoordat
dodoen
canhoeft
you cankunt
followingvolgende
startstart
youu
eachin

EN For enabling the PHP service to start automatically, so you don't have to type the command above every time the server restarts, use this command here:

NL Om de PHP-service in staat te stellen automatisch te starten, dus u hoeft niet de bovenstaande opdracht te typen telkens wanneer de server opnieuw wordt opgestart, deze opdracht hier gebruikt:

inglêsholandês
phpphp
automaticallyautomatisch
commandopdracht
usegebruikt
serviceservice
serverserver
thede
have tohoeft
toom
sodus
dontniet
thisdeze
typetypen
herehier
startstarten
youu

EN Bash command aliases allow you to create your own commands or use certain flags for commands on standard command invocation

NL Met Bash-opdrachtaliassen kunt u uw eigen opdrachten maken of bepaalde vlaggen gebruiken voor opdrachten bij het aanroepen van standaardopdrachten

inglêsholandês
flagsvlaggen
orof
usegebruiken
youu
youruw
owneigen
forvoor
certainbepaalde

EN \$? - The previous command's exit code. This will update after each command is run.

NL \ $?- de exitcode van de vorige opdracht.Dit wordt bijgewerkt nadat elke opdracht wordt uitgevoerd.

inglêsholandês
updatebijgewerkt
commandopdracht
thede
eachelke
previousvorige
afternadat
iswordt
thisdit

Mostrando 50 de 50 traduções