Prevedi "dsr lijnen" na Engleski

EN Data set ready DSR is not implemented because it can easily be emulated by connecting the DTR and DSR lines in the adapter at the DTE side.

• set ready DSR
• easily be emulated
• connecting the DTR

EN Data set ready DSR is not implemented because it can easily be emulated by connecting the DTR and DSR lines in the adapter at the DTE side.

• set ready DSR
• easily be emulated
• connecting the DTR

EN The area/line coupler connects two KNX lines to each other for data transfer and ensures electrical isolation between these lines. As a result, each bus line of a KNX installation can be electrically operated independently of the other lines.

• area
• line coupler connects
• transfer
• ensures electrical isolation
• lines
• result
• each bus line
• electrically operated independently

EN The area/line coupler connects two KNX lines to each other for data transfer and ensures electrical isolation between these lines. As a result, each bus line of a KNX installation can be electrically operated independently of the other lines.

• area
• line coupler connects
• transfer
• ensures electrical isolation
• lines
• result
• each bus line
• electrically operated independently

EN It doesn?t harm most of the time if you connect both lines, even with systems that don?t use the DSR input signal.

• doesn
• connect both lines
• even with systems
• don
• DSR input

EN It doesn?t harm most of the time if you connect both lines, even with systems that don?t use the DSR input signal.

• doesn
• connect both lines
• even with systems
• don
• DSR input

EN MakeLine generates geodesic lines, which will display as curved when connecting locations that are far apart on the earth

• MakeLine generates geodesic
• display as curved
• earth

EN When these lines are cross-connected (as in most null modem cables) flow control can be performed using these lines

• lines are cross-connected
• null modem cables

EN When these lines are cross-connected (as in most null modem cables) flow control can be performed using these lines

• lines are cross-connected
• null modem cables

EN Customize your design by incorporating icons, stock photos, shapes, lines and more from the left sidebar.

• Customize your design
• incorporating icons
• stock photos
• shapes
• lines
• left

EN This connects the printer DTR line through the cross cable BC16E to the PC?s DSR, CTS and CD inputs

• connects the printer
• DSR
• CTS
• CD inputs

EN To prevent this from happening, two other pins on the connector are used, the data set ready DSR and the data terminal ready DTR

• two other pins
• connector are used
• set ready DSR
• terminal ready DTR

EN In this situation the DTR of the printer is send back to the DSR input of the computer

• situation the DTR
• printer is send
• computer

EN For this purpose, the DTR data terminal ready and DSR data set ready signals are present

• purpose
• DTR data terminal
• DSR data set
• signals are present

EN The DTE uses the DTR signal to signal that it is ready to accept information, whereas the DCE uses the DSR signal for the same purpose

• signal to signal
• ready to accept
• whereas the DCE
• same purpose

EN Yes, it is simple but can we use it in all circumstances? There is a problem, if either of the two devices checks the DSR or CD inputs

• Yes
• circumstances
• problem
• CD inputs

EN The DTR to DSR connection is optional

• DTR to DSR
• optional

EN Consider first the DSR signal (pin 6)

• signal
• pin

EN The assumption is, that if software has been written to check the DSR line to test communication availability, it will probably also set the DTR output to indicate its own state

• check the DSR
• test communication availability
• probably also set
• own state

EN This implies that at least 99% of all serial communication software is capable of faking its own DSR check with this null modem cable.

• serial communication software
• capable of faking
• own DSR check
• null modem

EN This information is read on the DSR input, the same input used for this purpose with modem communication

• input
• same input used
• purpose with modem

EN This prevents the software from blocking input in case it checks the CTS, DSR or CD inputs.

• prevents the software
• checks the CTS
• DSR
• CD

EN To prevent this from happening, two other pins on the connector are used, the data set ready DSR and the data terminal ready DTR

• two other pins
• connector are used
• set ready DSR
• terminal ready DTR

EN For this purpose, the DTR data terminal ready and DSR data set ready signals are present

• purpose
• DTR data terminal
• DSR data set
• signals are present

EN The DTE uses the DTR signal to signal that it is ready to accept information, whereas the DCE uses the DSR signal for the same purpose

• signal to signal
• ready to accept
• whereas the DCE
• same purpose

EN Yes, it is simple but can we use it in all circumstances? There is a problem, if either of the two devices checks the DSR or CD inputs

• Yes
• circumstances
• problem
• CD inputs

EN Consider first the DSR signal (pin 6)

• signal
• pin

EN The assumption is, that if software has been written to check the DSR line to test communication availability, it will probably also set the DTR output to indicate its own state

• check the DSR
• test communication availability
• probably also set
• own state

EN This implies that at least 99% of all serial communication software is capable of faking its own DSR check with this null modem cable.

• serial communication software
• capable of faking
• own DSR check
• null modem

EN This information is read on the DSR input, the same input used for this purpose with modem communication

• input
• same input used
• purpose with modem

EN This connects the printer DTR line through the cross cable BC16E to the PC?s DSR, CTS and CD inputs

• connects the printer
• DSR
• CTS
• CD inputs

EN The DTR to DSR connection is optional

• DTR to DSR
• optional

EN In this situation the DTR of the printer is send back to the DSR input of the computer

• situation the DTR
• printer is send
• computer

EN This prevents the software from blocking input in case it checks the CTS, DSR or CD inputs.

• prevents the software
• checks the CTS
• DSR
• CD

EN You can find useful guidelines and questions to answers on our help pages

• useful guidelines
• questions to answers
• pages

EN Generation IKKS (pronounce X) becomes the new IKKS brand signature. The Women, Men and Junior lines are only one tribe now: Generation IKKS

• Generation IKKS
• pronounce X
• brand signature
• Women
• Men

EN Keywords used by Michel Battaglia to describe this photograph: Giraffe, black and white, lines, line, shape, sky, clouds, monochrome, steppe, field, hill, wild animals,

• Battaglia to describe
• photograph
• Giraffe
• black
• white
• lines
• line
• shape
• sky
• clouds
• monochrome
• steppe
• field
• hill
• wild

EN I had just framed on the hands of Charles Gayle, the lines of his hand that gave the tempo and made this magical moment ...

• had just framed
• hands of Charles
• lines of his
• gave the tempo
• made this magical

EN Dimitry Roulland has not yet found the words to describe this photo Grey lines. Let your imagination take you into the world of this photograph.

• describe this photo
• lines
• Let your imagination

EN Keywords used by Dimitry Roulland to describe this photograph: city ; grey ; lines ; dance ; dancer ; ballet ; ballerina ; london

• Roulland to describe
• photograph
• city
• grey
• lines
• dance
• dancer
• ballet
• ballerina
• london

EN Read more about the different lines

• different lines

EN You can also correct diverging lines using perspective correction and create panoramas from several images fully automatically

• correct diverging lines
• perspective correction
• images fully automatically

EN You can draw freehand shapes and lines or use the premade shapes for a head start.

• draw freehand shapes
• lines
• head

EN Limit the number of views in your visualisation to three or four. If you add too many, the big picture gets lost in the details.

• Limit the number
• three
• four
• big picture gets

EN This white paper outlines high availability in Tableau Server 2018.2 with Tableau Services Manager. It also describes how to architect, configure and deploy on a variety of hardware.

• white paper outlines
• availability in Tableau
• Tableau Services Manager
• configure

EN This white paper outlines how Tableau’s built-in backup and recovery technologies can be used to meet your DR needs.

• white paper outlines
• built-in backup
• used to meet
• DR

EN When working with data at a local/city scale, like pick-up and drop-off locations for a bicycle-share, the lines will appear straight

• local
• city scale
• pick-up
• bicycle-share
• lines will appear

EN Add branches: Branches are lines that extend outwards from the center and symbolize the main categories or key ideas that relate to your subject

• Add branches
• Branches are lines
• center
• symbolize the main
• subject

EN Along these lines, rather than hezam (belt), you see 7ezam

• Along these lines
• rather than hezam
• belt

EN abstract background with flowing lines and bokeh lights design 2690478 Vector Art at Vecteezy

• lines
• bokeh lights design
• Art at Vecteezy