EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.
EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.
KO 명령줄 인터페이스 - 명령줄 인터페이스 도구를 사용하여 Parallels Desktop을 제어하고 VM(설정 및 구성 포함)을 관리합니다. 명령줄 인터페이스는 또한 Vagrant와 같은 추가 통합을 제공합니다.
Terjime myeonglyeongjul inteopeiseu - myeonglyeongjul inteopeiseu doguleul sayonghayeo Parallels Desktop-eul jeeohago VM(seoljeong mich guseong poham)eul gwanlihabnida. myeonglyeongjul inteopeiseuneun ttohan Vagrantwa gat-eun chuga tonghab-eul jegonghabnida.
EN Command Line Interface – Use Command Line Interface tools to control Parallels Desktop and manage VMs, including their settings and configuration. Command Line interface also enables additional integrations like Vagrant.
KO 명령줄 인터페이스 - 명령줄 인터페이스 도구를 사용하여 Parallels Desktop을 제어하고 VM(설정 및 구성 포함)을 관리합니다. 명령줄 인터페이스는 또한 Vagrant와 같은 추가 통합을 제공합니다.
Terjime myeonglyeongjul inteopeiseu - myeonglyeongjul inteopeiseu doguleul sayonghayeo Parallels Desktop-eul jeeohago VM(seoljeong mich guseong poham)eul gwanlihabnida. myeonglyeongjul inteopeiseuneun ttohan Vagrantwa gat-eun chuga tonghab-eul jegonghabnida.
EN Use the command-line tool to manage objects in your account. Add or remove users, vaults, and items with a single command.
KO 커맨드 라인 도구를 사용해 계정의 개체들을 관리하세요. 하나의 명령으로 사용자, 금고 또는 항목을 추가하거나 제거할 수 있습니다.
Terjime keomaendeu lain doguleul sayonghae gyejeong-ui gaechedeul-eul gwanlihaseyo. hanaui myeonglyeong-eulo sayongja, geumgo ttoneun hangmog-eul chugahageona jegeohal su issseubnida.
EN There will be an option to set up the daily cron job on this page, followed by a PHP command to use. To do so, Copy the command under step three (3) that begins with PHP -q
KO 이 페이지에서 일일 Cron 작업을 설정 한 다음 PHP 명령을 사용하여 사용할 수있는 옵션이 있습니다.그렇게하려면 PHP -Q로 시작하는 3 단계 (3) 아래의 명령을 복사하십시오.
Terjime i peijieseo il-il Cron jag-eob-eul seoljeong han da-eum PHP myeonglyeong-eul sayonghayeo sayonghal su-issneun obsyeon-i issseubnida.geuleohgehalyeomyeon PHP -Qlo sijaghaneun 3 dangye (3) alaeui myeonglyeong-eul bogsahasibsio.
Iňlis | Koreýçe |
---|---|
php | php |
EN Before moving on, you'll want to enable Nginx to start on bootup. That way, you do not have to retype the above command each time the server starts. You can do so by entering the following command:
KO 계속하기 전에 nginx가 부팅 할 때 시작하도록 설정해야합니다.그렇게하면 서버가 시작될 때마다 위의 명령을 다시 입력 할 필요가 없습니다.다음 명령을 입력하여 그렇게 할 수 있습니다.
Terjime gyesoghagi jeon-e nginxga buting hal ttae sijaghadolog seoljeonghaeyahabnida.geuleohgehamyeon seobeoga sijagdoel ttaemada wiui myeonglyeong-eul dasi iblyeog hal pil-yoga eobs-seubnida.da-eum myeonglyeong-eul iblyeoghayeo geuleohge hal su issseubnida.
EN Bash command aliases allow you to create your own commands or use certain flags for commands on standard command invocation
KO Bash 명령 별칭을 사용하면 고유 한 명령을 만들거나 표준 명령 호출에서 명령에 특정 플래그를 사용할 수 있습니다
Terjime Bash myeonglyeong byeolching-eul sayonghamyeon goyu han myeonglyeong-eul mandeulgeona pyojun myeonglyeong hochul-eseo myeonglyeong-e teugjeong peullaegeuleul sayonghal su issseubnida
EN \$? - The previous command's exit code. This will update after each command is run.
KO \ $?- 이전 명령의 종료 코드입니다.이것은 각 명령이 실행 된 후에 업데이트됩니다.
Terjime \ $?- ijeon myeonglyeong-ui jonglyo kodeu-ibnida.igeos-eun gag myeonglyeong-i silhaeng doen hue eobdeiteudoebnida.
EN Then add it to FreeOffice by choosing the ribbon command File | Options or the menu command Tools > Options, switching to the Language tab and clicking on the Hunspell dictionaries button.
KO 그런 다음, 파일 | 옵션 또는 도구 > 옵션 메뉴 명령을 선택하여 FreeOffice에 추가하고, 언어 탭으로 전환하고 Hunspell 사전 버튼을 클릭합니다.
Terjime geuleon da-eum, pail | obsyeon ttoneun dogu > obsyeon menyu myeonglyeong-eul seontaeghayeo FreeOfficee chugahago, eon-eo taeb-eulo jeonhwanhago Hunspell sajeon beoteun-eul keullighabnida.
EN Start SSH SessionQuickly start an SSH session with your VM. This command requires an SSH server running on your VM; calls 'ssh <vm_ip>' command in Terminal.
KO SSH 세션 시작VM으로 SSH 세션을 빠르게 시작합니다. 이 명령에는 VM에서 실행 중인 SSH 서버가 필요합니다. 'ssh <vm_ip>' 명령을 단말에서 호출합니다.
Terjime SSH sesyeon sijagVMeulo SSH sesyeon-eul ppaleuge sijaghabnida. i myeonglyeong-eneun VMeseo silhaeng jung-in SSH seobeoga pil-yohabnida. 'ssh <vm_ip>' myeonglyeong-eul danmal-eseo hochulhabnida.
Iňlis | Koreýçe |
---|---|
ssh | ssh |
vm | vm |
EN Amazon Location Service is supported by AWS Command Line Interface (CLI), a unified tool for you to download, configure, and control multiple AWS services from the command line and automate them through scripts.
KO Amazon Location Service는 명령줄에서 여러 AWS 서비스를 다운로드, 구성 및 제어하고 스크립트를 통해 자동화하는 통합된 도구인 AWS 명령줄 인터페이스(CLI)로 지원됩니다.
Terjime Amazon Location Serviceneun myeonglyeongjul-eseo yeoleo AWS seobiseuleul daunlodeu, guseong mich jeeohago seukeulibteuleul tonghae jadonghwahaneun tonghabdoen dogu-in AWS myeonglyeongjul inteopeiseu(CLI)lo jiwondoebnida.
Iňlis | Koreýçe |
---|---|
amazon | amazon |
aws | aws |
EN Then add it to FreeOffice by choosing the ribbon command File | Options or the menu command Tools > Options, switching to the Language tab and clicking on the Hunspell dictionaries button.
KO 그런 다음, 파일 | 옵션 또는 도구 > 옵션 메뉴 명령을 선택하여 FreeOffice에 추가하고, 언어 탭으로 전환하고 Hunspell 사전 버튼을 클릭합니다.
Terjime geuleon da-eum, pail | obsyeon ttoneun dogu > obsyeon menyu myeonglyeong-eul seontaeghayeo FreeOfficee chugahago, eon-eo taeb-eulo jeonhwanhago Hunspell sajeon beoteun-eul keullighabnida.
EN With the output of this command, it will tell you if the SSH server is up and Active or failed for any reason. If SSH is down on the server, the following command can be used to start it back up,
KO 이 명령의 출력을 사용하면 SSH 서버가 작동하고 있는지 알려줍니다. 유효한 또는 어떤 이유로 든 실패했습니다.SSH가 서버에 다운 된 경우 다음 명령을 사용하여 백업을 시작할 수 있습니다.
Terjime i myeonglyeong-ui chullyeog-eul sayonghamyeon SSH seobeoga jagdonghago issneunji allyeojubnida. yuhyohan ttoneun eotteon iyulo deun silpaehaessseubnida.SSHga seobeoe daun doen gyeong-u da-eum myeonglyeong-eul sayonghayeo baeg-eob-eul sijaghal su issseubnida.
Iňlis | Koreýçe |
---|---|
ssh | ssh |
EN Start SSH SessionQuickly start an SSH session with your VM. This command requires an SSH server running on your VM; calls 'ssh <vm_ip>' command in Terminal.
KO SSH 세션 시작VM으로 SSH 세션을 빠르게 시작합니다. 이 명령에는 VM에서 실행 중인 SSH 서버가 필요합니다. 'ssh <vm_ip>' 명령을 단말에서 호출합니다.
Terjime SSH sesyeon sijagVMeulo SSH sesyeon-eul ppaleuge sijaghabnida. i myeonglyeong-eneun VMeseo silhaeng jung-in SSH seobeoga pil-yohabnida. 'ssh <vm_ip>' myeonglyeong-eul danmal-eseo hochulhabnida.
Iňlis | Koreýçe |
---|---|
ssh | ssh |
vm | vm |
EN Use the command-line tool to manage objects in your account. Add or remove users, vaults, and items with a single command.
KO 커맨드 라인 도구를 사용해 계정의 개체들을 관리하세요. 하나의 명령으로 사용자, 금고 또는 항목을 추가하거나 제거할 수 있습니다.
Terjime keomaendeu lain doguleul sayonghae gyejeong-ui gaechedeul-eul gwanlihaseyo. hanaui myeonglyeong-eulo sayongja, geumgo ttoneun hangmog-eul chugahageona jegeohal su issseubnida.
EN There will be an option to set up the daily cron job on this page, followed by a PHP command to use. To do so, Copy the command under step three (3) that begins with PHP -q
KO 이 페이지에서 일일 Cron 작업을 설정 한 다음 PHP 명령을 사용하여 사용할 수있는 옵션이 있습니다.그렇게하려면 PHP -Q로 시작하는 3 단계 (3) 아래의 명령을 복사하십시오.
Terjime i peijieseo il-il Cron jag-eob-eul seoljeong han da-eum PHP myeonglyeong-eul sayonghayeo sayonghal su-issneun obsyeon-i issseubnida.geuleohgehalyeomyeon PHP -Qlo sijaghaneun 3 dangye (3) alaeui myeonglyeong-eul bogsahasibsio.
Iňlis | Koreýçe |
---|---|
php | php |
EN 2. Confirm that the hwagent command is available (the sudo command is not necessary if you're the root user).
KO 2. hwagent 명령을 사용할 수 있는지 확인하십시오 (루트 사용자 인 경우 Sudo 명령이 필요하지 않음).
Terjime 2. hwagent myeonglyeong-eul sayonghal su issneunji hwag-inhasibsio (luteu sayongja in gyeong-u Sudo myeonglyeong-i pil-yohaji anh-eum).
EN Before moving on, you'll want to enable Nginx to start on bootup. That way, you do not have to retype the above command each time the server starts. You can do so by entering the following command:
KO 계속하기 전에 nginx가 부팅 할 때 시작하도록 설정해야합니다.그렇게하면 서버가 시작될 때마다 위의 명령을 다시 입력 할 필요가 없습니다.다음 명령을 입력하여 그렇게 할 수 있습니다.
Terjime gyesoghagi jeon-e nginxga buting hal ttae sijaghadolog seoljeonghaeyahabnida.geuleohgehamyeon seobeoga sijagdoel ttaemada wiui myeonglyeong-eul dasi iblyeog hal pil-yoga eobs-seubnida.da-eum myeonglyeong-eul iblyeoghayeo geuleohge hal su issseubnida.
EN Bash command aliases allow you to create your own commands or use certain flags for commands on standard command invocation
KO Bash 명령 별칭을 사용하면 고유 한 명령을 만들거나 표준 명령 호출에서 명령에 특정 플래그를 사용할 수 있습니다
Terjime Bash myeonglyeong byeolching-eul sayonghamyeon goyu han myeonglyeong-eul mandeulgeona pyojun myeonglyeong hochul-eseo myeonglyeong-e teugjeong peullaegeuleul sayonghal su issseubnida
EN \$? - The previous command's exit code. This will update after each command is run.
KO \ $?- 이전 명령의 종료 코드입니다.이것은 각 명령이 실행 된 후에 업데이트됩니다.
Terjime \ $?- ijeon myeonglyeong-ui jonglyo kodeu-ibnida.igeos-eun gag myeonglyeong-i silhaeng doen hue eobdeiteudoebnida.
EN Step 1: Update your OS by running the command below.
KO 1 단계: 아래 명령을 실행하여 OS를 업데이트하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo OSleul eobdeiteuhasibsio.
EN Step 2: Enable MySQL by entering the command below.
KO 2 단계: 아래 명령을 입력하여 MySQL을 활성화하십시오.
Terjime 2 dangye: alae myeonglyeong-eul iblyeoghayeo MySQLeul hwalseonghwahasibsio.
Iňlis | Koreýçe |
---|---|
mysql | mysql |
EN Step 1: Ensure Apache is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 1 단계: 아래 명령을 실행하여 Apache가 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo Apachega silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
EN Step 2: Ensure MySQL is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 2 단계: 아래 명령을 실행하여 MySQL이 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 2 dangye: alae myeonglyeong-eul silhaenghayeo MySQLi silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
Iňlis | Koreýçe |
---|---|
mysql | mysql |
EN Step 3: Ensure PHP is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 3 단계 : 아래 명령을 실행하여 PHP가 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 3 dangye : alae myeonglyeong-eul silhaenghayeo PHPga silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
Iňlis | Koreýçe |
---|---|
php | php |
EN Before we begin installing Vesta, let's make sure everything is up to date on your VPS. Run the command below:
KO 우리가 VESTA를 설치하기 전에 VPS에서 모든 것이 최신인지 확인합시다.아래 명령을 실행하십시오.
Terjime uliga VESTAleul seolchihagi jeon-e VPSeseo modeun geos-i choesin-inji hwag-inhabsida.alae myeonglyeong-eul silhaenghasibsio.
Iňlis | Koreýçe |
---|---|
vps | vps |
EN Step 1: Download the VestaCP installation package by running the command below.
KO 1 단계: 아래 명령을 실행하여 VESTACP 설치 패키지를 다운로드하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo VESTACP seolchi paekijileul daunlodeuhasibsio.
EN Moving forward, below is an example of a prompt that displays the logged-in user, the short hostname, the exit code of the last command passed, and on a new line provides the typing prompt:
KO 여기...에앞으로 이동하면 로그인 한 사용자가 표시되는 프롬프트의 예제, 마지막 명령의 짧은 호스트 이름, 마지막 명령의 종료 코드가 전달되고 새 줄에서 입력하는 프롬프트를 제공합니다.
Terjime yeogi...eap-eulo idonghamyeon logeu-in han sayongjaga pyosidoeneun peulompeuteuui yeje, majimag myeonglyeong-ui jjalb-eun hoseuteu ileum, majimag myeonglyeong-ui jonglyo kodeuga jeondaldoego sae jul-eseo iblyeoghaneun peulompeuteuleul jegonghabnida.
EN To sync a directory with your new bucket, use the command below with the path to your local directory, your remote name, and bucket/remote directory name. This will only modify the destination, your Rclone remote directory:
KO 새 버킷으로 디렉토리를 동기화하려면 아래 명령을 로컬 디렉토리, 원격 이름 및 버킷 / 원격 디렉토리 이름으로 사용하십시오.이렇게하면 RCLONE 원격 디렉토리 만 대상 만 수정됩니다.
Terjime sae beokis-eulo dilegtolileul dong-gihwahalyeomyeon alae myeonglyeong-eul lokeol dilegtoli, wongyeog ileum mich beokis / wongyeog dilegtoli ileum-eulo sayonghasibsio.ileohgehamyeon RCLONE wongyeog dilegtoli man daesang man sujeongdoebnida.
EN Similar to syncing, you should work directly with a remote directory in your Rclone remote. To mount a remote directory locally, run the command below with your remote name, directory, and mount point:
KO 동기화와 유사하게, rClone Remote에서 원격 디렉토리로 직접 작업해야합니다.원격 디렉토리를 로컬로 마운트하려면 원격 이름, 디렉토리 및 마운트 지점으로 아래 명령을 실행하십시오.
Terjime dong-gihwawa yusahage, rClone Remoteeseo wongyeog dilegtolilo jigjeob jag-eobhaeyahabnida.wongyeog dilegtolileul lokeollo maunteuhalyeomyeon wongyeog ileum, dilegtoli mich maunteu jijeom-eulo alae myeonglyeong-eul silhaenghasibsio.
EN To end the mount, ensure you are not in the mount point and CTRL + C from the shell where the mount is running. If there is an issue unmounting, manually unmount with the command below:
KO 마운트를 끝내려면 마운트가 실행중인 쉘에서 마운트 포인트와 Ctrl + C가 아닌지 확인하십시오.문제가 해결되지 않으면 아래 명령과 수동으로 마운트 해제하십시오.
Terjime maunteuleul kkeutnaelyeomyeon maunteuga silhaengjung-in swel-eseo maunteu pointeuwa Ctrl + Cga aninji hwag-inhasibsio.munjega haegyeoldoeji anh-eumyeon alae myeonglyeong-gwa sudong-eulo maunteu haejehasibsio.
EN Creating A User From The Command Line Or Shell (Please See Steps Below)
KO 명령 줄 또는 셸에서 사용자 만들기 (아래 단계 참조)
Terjime myeonglyeong jul ttoneun syel-eseo sayongja mandeulgi (alae dangye chamjo)
EN Step 2: If you are not logged in as root, type the command below and enter root password.
KO 2 단계: root로 로그인하지 않은 경우 아래 명령을 입력하고 루트 암호를 입력하십시오.
Terjime 2 dangye: rootlo logeu-inhaji anh-eun gyeong-u alae myeonglyeong-eul iblyeoghago luteu amholeul iblyeoghasibsio.
EN Kill Command deals 50% increased damage against enemies below 35% health.
KO 생명력이 35% 미만인 적에게 살상 명령으로 입히는 피해가 50%만큼 증가합니다.
Terjime saengmyeonglyeog-i 35% miman-in jeog-ege salsang myeonglyeong-eulo ibhineun pihaega 50%mankeum jeung-gahabnida.
EN If your kernel version is listed at the top, use 0 in the command below
KO 커널 버전이 상단에 나열되면 아래 명령에서 0을 사용하십시오
Terjime keoneol beojeon-i sangdan-e nayeoldoemyeon alae myeonglyeong-eseo 0eul sayonghasibsio
EN To view your snapshots, use the command below -
KO 스냅 샷을 보려면 아래 명령을 사용하십시오 -
Terjime seunaeb syas-eul bolyeomyeon alae myeonglyeong-eul sayonghasibsio -
EN Step 1: Update your OS by running the command below.
KO 1 단계: 아래 명령을 실행하여 OS를 업데이트하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo OSleul eobdeiteuhasibsio.
EN Step 2: Enable MySQL by entering the command below.
KO 2 단계: 아래 명령을 입력하여 MySQL을 활성화하십시오.
Terjime 2 dangye: alae myeonglyeong-eul iblyeoghayeo MySQLeul hwalseonghwahasibsio.
Iňlis | Koreýçe |
---|---|
mysql | mysql |
EN Step 1: Ensure Apache is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 1 단계: 아래 명령을 실행하여 Apache가 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo Apachega silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
EN Step 2: Ensure MySQL is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 2 단계: 아래 명령을 실행하여 MySQL이 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 2 dangye: alae myeonglyeong-eul silhaenghayeo MySQLi silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
Iňlis | Koreýçe |
---|---|
mysql | mysql |
EN Step 3: Ensure PHP is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 3 단계 : 아래 명령을 실행하여 PHP가 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 3 dangye : alae myeonglyeong-eul silhaenghayeo PHPga silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
Iňlis | Koreýçe |
---|---|
php | php |
EN Before we begin installing Vesta, let's make sure everything is up to date on your VPS. Run the command below:
KO 우리가 VESTA를 설치하기 전에 VPS에서 모든 것이 최신인지 확인합시다.아래 명령을 실행하십시오.
Terjime uliga VESTAleul seolchihagi jeon-e VPSeseo modeun geos-i choesin-inji hwag-inhabsida.alae myeonglyeong-eul silhaenghasibsio.
Iňlis | Koreýçe |
---|---|
vps | vps |
EN Step 1: Download the VestaCP installation package by running the command below.
KO 1 단계: 아래 명령을 실행하여 VESTACP 설치 패키지를 다운로드하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo VESTACP seolchi paekijileul daunlodeuhasibsio.
EN Step 1: Update your OS by running the command below.
KO 1 단계: 아래 명령을 실행하여 OS를 업데이트하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo OSleul eobdeiteuhasibsio.
EN Step 2: Enable MySQL by entering the command below.
KO 2 단계: 아래 명령을 입력하여 MySQL을 활성화하십시오.
Terjime 2 dangye: alae myeonglyeong-eul iblyeoghayeo MySQLeul hwalseonghwahasibsio.
Iňlis | Koreýçe |
---|---|
mysql | mysql |
EN Step 1: Ensure Apache is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 1 단계: 아래 명령을 실행하여 Apache가 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo Apachega silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
EN Step 2: Ensure MySQL is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 2 단계: 아래 명령을 실행하여 MySQL이 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 2 dangye: alae myeonglyeong-eul silhaenghayeo MySQLi silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
Iňlis | Koreýçe |
---|---|
mysql | mysql |
EN Step 3: Ensure PHP is running by running the command below. Note that this process should also show an Active (running) status in green if it's working correctly.
KO 3 단계 : 아래 명령을 실행하여 PHP가 실행 중인지 확인하십시오.이 프로세스는 올바르게 작동하는 경우 녹색으로 활성 (실행중인) 상태를 표시해야합니다.
Terjime 3 dangye : alae myeonglyeong-eul silhaenghayeo PHPga silhaeng jung-inji hwag-inhasibsio.i peuloseseuneun olbaleuge jagdonghaneun gyeong-u nogsaeg-eulo hwalseong (silhaengjung-in) sangtaeleul pyosihaeyahabnida.
Iňlis | Koreýçe |
---|---|
php | php |
EN Before we begin installing Vesta, let's make sure everything is up to date on your VPS. Run the command below:
KO 우리가 VESTA를 설치하기 전에 VPS에서 모든 것이 최신인지 확인합시다.아래 명령을 실행하십시오.
Terjime uliga VESTAleul seolchihagi jeon-e VPSeseo modeun geos-i choesin-inji hwag-inhabsida.alae myeonglyeong-eul silhaenghasibsio.
Iňlis | Koreýçe |
---|---|
vps | vps |
EN Step 1: Download the VestaCP installation package by running the command below.
KO 1 단계: 아래 명령을 실행하여 VESTACP 설치 패키지를 다운로드하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo VESTACP seolchi paekijileul daunlodeuhasibsio.
EN Step 1: Update your OS by running the command below.
KO 1 단계: 아래 명령을 실행하여 OS를 업데이트하십시오.
Terjime 1 dangye: alae myeonglyeong-eul silhaenghayeo OSleul eobdeiteuhasibsio.
{Totalresult} terjimeleriniň 50 görkezmek