"principe dat metalen" тілін Ағылшын тіліне аударыңыз

EN Most metal detectors work on the fact that metals in a magnetic field change the behavior of the field

• fact that metals
• magnetic field change

EN Most metal detectors work on the fact that metals in a magnetic field change the behavior of the field

• fact that metals
• magnetic field change

EN Closely related to FAIR data is the societal necessity for FACT data science

• science

EN In the top of the curve, ferro-magnetic metals will cause a small delay of the signal to drop below 0.7 Volt, where non-ferrous metals will shift that transition point a little bit earlier

• signal to drop
• Volt
• bit earlier

EN In the top of the curve, ferro-magnetic metals will cause a small delay of the signal to drop below 0.7 Volt, where non-ferrous metals will shift that transition point a little bit earlier

• signal to drop
• Volt
• bit earlier

EN Some metals, like critical rare earth elements, are too difficult or too expensive to separate out for recycling. Only a small handful of metals can be recovered through smelting.

• metals
• critical rare earth
• too difficult
• recycling

EN Metal handle butt – On larger knifes, a metal handle butt doubles as a hammer or nice solid surface for rapping on your scuba tank.

• Metal handle butt
• larger knifes
• metal handle butt
• hammer
• nice solid surface

EN All you need are suitable metal surfaces such as balcony railings or metal braces

• suitable metal surfaces
• balcony railings
• metal braces

EN Screw-on metal discs & small metal plates

• Screw-on metal discs
• small metal plates

EN An air cooler mounts to your CPU and uses 1 or 2 fans to move air through a series of thin metal fins. These metal fins house the heat given off by your CPU when it is under load.

• air cooler mounts
• CPU
• uses
• fans to move
• series of thin
• fins
• metal fins house
• heat given off
• under

EN Some metals, like critical rare earth elements, are too difficult or too expensive to separate out for recycling. Only a small handful of metals can be recovered through smelting.

• metals
• critical rare earth
• too difficult
• recycling

EN Buster + Punch Door Knob is finished with black metal back plates and fixed with black metal coin screws.

• Buster
• Punch Door Knob
• finished with black
• back plates
• fixed with black
• coin

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Combining 3D printing with metal casting bridges the gap between generatively designed parts and proven manufacturing approaches for large metal objects.

• between generatively designed
• proven manufacturing approaches
• large metal

EN Metal handle butt – On larger knifes, a metal handle butt doubles as a hammer or nice solid surface for rapping on your scuba tank.

• Metal handle butt
• larger knifes
• metal handle butt
• hammer
• nice solid surface

EN The Samson Q2U is basically the same mic as above. I?ve had reports that you can?t seem to get the ATR2100 outside the US, so this is what I would get if that?s the case.

• Samson is basically
• ve had reports
• outside the US

EN We work on the principle that we have a legitimate interest in sending analytical cookies and that your prior consent is not required.

• analytical cookies

EN Vitra believes such environments are best shaped by the principle of the collage – the idea that a vibrant living space gains character through a mix of old and new, high and low, classic and contemporary.

• collage
• living space gains
• mix of old
• high
• low
• classic

EN Vitra believes such environments are best shaped by the principle of the collage – the idea that a vibrant living space gains character through a mix of old and new, high and low, classic and contemporary.

• collage
• living space gains
• mix of old
• high
• low
• classic

EN Jailing: We make sure that the ‘jailing’ principle is applied at the level of the application in order to guarantee you an isolated environment on which you can run your applications

• Jailing
• principle is applied
• order to guarantee
• run your applications

EN Jailing: We make sure that the ‘jailing’ principle is applied at the level of the operating system in order to guarantee you an isolated environment

• Jailing
• principle is applied
• system in order
• environment

EN That's the whole power of WordPress ? you can launch basically any type of website with it (including eCommerce or other online business), and do so at a really low cost and with small time investment.

• That's the whole
• WordPress
• eCommerce
• really low cost

EN It’s the old “do more with less” mantra in full effect, helping businesses to accommodate growing pains without incurring additional costs.

• old
• mantra in full
• growing pains without
• additional

EN This is basically the bridge between your microphone and your computer. It converts the analog signal from the mic into a digital signal that the computer can use.

• basically the bridge
• microphone
• computer
• converts the analog

EN Stay away from regular Macbooks (the non ?Pro? models). They basically use a similar processor to a phone, meaning they?re designed for battery life over speed.

• Macbooks
• non
• Pro
• models

EN Basically what that means is that you want a processor (CPU) with fast single core performance

• want a processor
• CPU
• fast single core

EN Up top, you can see we are in the Trim mode. Here you can add fade in and out to your track, create a loop, add markers (basically bookmarks),

• top
• Trim mode
• track
• create a loop
• add markers
• basically bookmarks

EN Essentially, yes. The main advantage is that we will use far less filter material than we would with a disposable mask, so no filter material goes to waste.

• Essentially
• yes
• far less filter
• mask
• filter material goes

EN Basically, it should be said that both OBD tuning as well as a performance increase via box a decent fuel savings is possible

• Basically
• should be said
• both OBD tuning
• performance increase via
• decent fuel savings
• possible

EN We are currently proving that terraforming is possible

• possible

EN And the operations staff in your data center? They maintain a data center that consists of a large number of identical systems

• center
• number of identical