NL Pak een LEDje en bestudeer het Arduino board. Vindt pin 13 (links bovenin in bovenstaande afbeelding) die als plus gaat functioneren. Je zult zien dat het pinnetje ernaast GND (Ground of the wel aarde) is. Simpel gezegd: de min.
NL Pak een LEDje en bestudeer het Arduino board. Vindt pin 13 (links bovenin in bovenstaande afbeelding) die als plus gaat functioneren. Je zult zien dat het pinnetje ernaast GND (Ground of the wel aarde) is. Simpel gezegd: de min.
EN Grab an LED and look at your Arduino board. Find pin 13 (upper left corner in the illustration above) which will serve as a plus. You will see a pin next to it called GND (Ground)whcih for simplicity reasons could be called: minus.
Dutch | Ingles |
---|---|
pak | grab |
arduino | arduino |
board | board |
pin | pin |
links | left |
bovenstaande | above |
afbeelding | illustration |
NL Kijk vervolgens goed naar het LEDje dat je net gepakt hebt. Bepaalde de Kathode pin en plaats deze boven de GND pin. De andere pin, Anode, schuiven we vervolgens in het gaatje van pin 13.
EN Now look at your LED and determine which pin is the Kathode and slide the Cathode pin into the connection that says GND and the other pin (Anode) in the connection that sais ?13?.
Dutch | Ingles |
---|---|
pin | pin |
andere | other |
NL niet aangesloten: werkt als B connectorverbonden met GND: werkt als A connector
EN not connected: works as B connectorconnected to GND: works as A connector
Dutch | Ingles |
---|---|
niet | not |
aangesloten | connected |
werkt | works |
als | as |
b | b |
connector | connector |
NL Pak een LEDje en bestudeer het Arduino board. Vindt pin 13 (links bovenin in bovenstaande afbeelding) die als plus gaat functioneren. Je zult zien dat het pinnetje ernaast GND (Ground of the wel aarde) is. Simpel gezegd: de min.
EN Grab an LED and look at your Arduino board. Find pin 13 (upper left corner in the illustration above) which will serve as a plus. You will see a pin next to it called GND (Ground)whcih for simplicity reasons could be called: minus.
Dutch | Ingles |
---|---|
pak | grab |
arduino | arduino |
board | board |
pin | pin |
links | left |
bovenstaande | above |
afbeelding | illustration |
NL Kijk vervolgens goed naar het LEDje dat je net gepakt hebt. Bepaalde de Kathode pin en plaats deze boven de GND pin. De andere pin, Anode, schuiven we vervolgens in het gaatje van pin 13.
EN Now look at your LED and determine which pin is the Kathode and slide the Cathode pin into the connection that says GND and the other pin (Anode) in the connection that sais ?13?.
Dutch | Ingles |
---|---|
pin | pin |
andere | other |
NL Pak een LEDje en bestudeer het Arduino board. Vindt pin 13 (links bovenin in bovenstaande afbeelding) die als plus gaat functioneren. Je zult zien dat het pinnetje ernaast GND (Ground of the wel aarde) is. Simpel gezegd: de min.
EN Grab an LED and look at your Arduino board. Find pin 13 (upper left corner in the illustration above) which will serve as a plus. You will see a pin next to it called GND (Ground)whcih for simplicity reasons could be called: minus.
Dutch | Ingles |
---|---|
pak | grab |
arduino | arduino |
board | board |
pin | pin |
links | left |
bovenstaande | above |
afbeelding | illustration |
NL Kijk vervolgens goed naar het LEDje dat je net gepakt hebt. Bepaalde de Kathode pin en plaats deze boven de GND pin. De andere pin, Anode, schuiven we vervolgens in het gaatje van pin 13.
EN Now look at your LED and determine which pin is the Kathode and slide the Cathode pin into the connection that says GND and the other pin (Anode) in the connection that sais ?13?.
Dutch | Ingles |
---|---|
pin | pin |
andere | other |
NL niet aangesloten: werkt als B connectorverbonden met GND: werkt als A connector
EN not connected: works as B connectorconnected to GND: works as A connector
Dutch | Ingles |
---|---|
niet | not |
aangesloten | connected |
werkt | works |
als | as |
b | b |
connector | connector |
Ipinapakita ang 8 ng 8 na mga pagsasalin