Terjemahkan "rgb is additive" ke Bahasa Czech

EN The BitMaker overlay for the BBC micro:bit is equipped with 6 Grove standard connectors, 5 pads for banana or crocodile plugs, buzzer and 4 RGB LEDs . The product is...

• BBC
• equipped with Grove
• connectors
• pads for banana
• crocodile plugs
• buzzer
• RGB LEDs
• product

EN Bit:Wear is a small addition for BBC micro:bit users to create intelligent clothing designs. The board features a vibrating motor , buzzer and addressed RGB LED . The...

• users to create
• clothing designs
• motor
• buzzer
• addressed RGB LED

EN Round expansion board for micro:bit modules featuring 24 RGB LEDs , microphone and speaker. The board in conjunction with the main module can turn into a watch, timer,...

• Round expansion board
• modules featuring RGB
• microphone
• speaker
• board in conjunction
• watch

EN Universal platform for Raspberry Pi with two wheels and ball support. It gas two micro DC motors with the motor control unit, diode RGB, line sensor, obstacle avoidance, and...

• Pi with two
• gas two micro
• control unit
• diode RGB
• line sensor
• obstacle avoidance

EN Module with addressed RGB LED WS2812

• Module with addressed
• LED

EN Module with digital addressed diode RGB WS2812 with outputs with the raster of 2.54 mm, for mounting of goldpin connectors (included). It allows you to get any color with a...

• Module with digital
• raster of mm
• mounting of goldpin
• included

EN Modules with smart RGB LEDs, specially designed for smart clothes. It has LED WS2812 5050 with integrated control unit. For control, it needs only one pin of the...

• Modules with smart
• LEDs
• clothes
• LED with integrated
• unit
• control

EN The module based on the APDS-9960 chip allows you to detect gestures made by hand movement and colors from the RGB color palette, as well as ambient light. The module is...

• detect gestures made
• hand movement
• color palette
• ambient light
• module

EN The module is designed to measure the intensity of RGB light, separately for red, green and blue. It is supplied with the voltage of 3.3 V, and communicates via an I2C interface.

• module is designed
• measure the intensity
• RGB light
• separately for red
• green
• blue

EN The fan with Fan Shim stand for Raspberry PI allows direct cooling of the minicomputer without additional fixtures and housings. The base is equipped with an RGB LED which,...

• fan with Fan
• stand for Raspberry
• allows direct cooling
• minicomputer without additional
• housings
• base is equipped
• RGB LED

EN The Pico Unicorn Pack is a 16x7 glossy matrix . It has a total of 112 RGB LEDs and 4 utility buttons , which are used to switch between modes, adjust brightness , and...

• Pico Unicorn Pack
• glossy matrix
• total of RGB
• utility buttons
• used to switch
• modes
• adjust brightness

EN Gesture and RGB color sensor I2C - APDS-9960 - DFRobot SEN0187

• Gesture
• RGB color sensor
• DFRobot

EN Gesture and RGB color sensor I2C - APDS-9960 - DFRobot SEN0187

• Gesture
• RGB color sensor
• DFRobot