Terjemahkan "liquid cooled" ke Belanda

EN We?re going to go up a level here with a recommendation from SkyTech Omega. What I love about this configuration is that it is liquid-cooled, which keeps fans from running full speed and interrupting your recordings.

• recommendation from SkyTech
• liquid-cooled
• full speed

EN To keep the neutrons fast, the core must be cooled with a gas or liquid metal

• keep the neutrons
• gas
• liquid metal

EN Shopify uses a templating language called Liquid. Liquid makes it easy to turn your HTML & CSS into a beautiful ecommerce website design.

• language called Liquid
• turn your HTML
• ecommerce website

EN Abstract liquid background. Liquid droplet background With modern colors. 675195 Vector Art at Vecteezy

• Abstract liquid background
• Liquid droplet background
• modern colors

EN <a href="https://www.vecteezy.com/free-vector/liquid">Liquid Vectors by Vecteezy</a>

• free-vector

EN The Liquid Pad for the MIGHTY vaporizer consists of a mesh of stainless steel wire, that can absorb up to 3 drops of a liquid or oil

• MIGHTY vaporizer consists
• mesh of stainless
• wire
• liquid
• oil

EN Whether case space is limited or a multiple liquid cooling systems are needed, the Kraken series provides RGB liquid cooling wherever you might need it.

• Whether case space
• limited
• multiple liquid cooling
• needed
• Kraken series provides
• liquid cooling wherever

EN SCK CEN separates and isolates them through liquid-liquid extraction

• SCK CEN separates
• extraction

EN Once the knife was placed in the corpse, the interest in the anatomy lessons soon cooled

• Once the knife
• lessons soon cooled

EN This high-performance tool is equipped with a powerful air-cooled motor

• powerful air-cooled motor

EN The first step is called “quenching” and involves heating the blade to temperatures above 800°C before being cooled rapidly

• step is called
• temperatures above before
• cooled rapidly

EN The additional process is called “tempering” where the blade is heated again to a lower temperature than previously then cooled slowly.

• blade is heated
• then cooled

EN These LEDs must be cooled with an aluminum heatsink or surface such as an aluminum plate or housing to extend the lifespan

• aluminum heatsink
• aluminum plate
• housing to extend
• lifespan

EN A high power LED (1 watt) with a red light color and a light angle of 110 °. This LED must be cooled with an aluminum heat sink or substrate such as an aluminum plate or housing to extend the service life.

• high power LED
• watt
• red light color
• aluminum heat sink
• aluminum plate
• housing to extend
• service

EN When you feel or hear the “click”, you are ready to vape! Enjoy your super-flavourful draws! When the VapCap has cooled, it will click again

• feel
• ready to vape
• Enjoy your super-flavourful
• VapCap has cooled
• click again

EN Remove the spore print from the refrigerator. Carefully unfold and tap the spores into the cooled water in the glass.

• Remove the spore
• refrigerator
• Carefully unfold
• tap the spores

EN Available as air or water cooled units, 7 different models are offered as well custom engineered packages.

• Available as air
• water cooled units
• custom engineered

EN This high-performance tool is equipped with a powerful air-cooled motor

• powerful air-cooled motor

EN IML packaging is ideal for the packaging of frozen and cooled products, as well as for paint packaging, bread boxes ...

• packaging of frozen
• cooled products
• paint packaging
• bread boxes

EN With solid cardboard being highly resistant to cold and moisture it is the ideal material for cooled warehouses, cold stores and long journeys.

• solid cardboard being
• resistant to cold
• warehouses
• cold stores
• long

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN 3D printed composite tooling and machining fixtures are often cheaper and faster to produce and conformally cooled inserts for injection moulds can dramatically reduce cycle times.

• printed composite tooling
• cheaper
• faster to produce
• conformally cooled inserts
• reduce cycle

EN The first step is called “quenching” and involves heating the blade to temperatures above 800°C before being cooled rapidly

• step is called
• temperatures above before
• cooled rapidly

EN The additional process is called “tempering” where the blade is heated again to a lower temperature than previously then cooled slowly.

• blade is heated
• then cooled

EN MYRRHA is the world’s first accelerator driven reactor cooled by a lead-bismuth eutectic. Will you discover new medical radioisotopes while working on nuclear waste solutions? Start your next mission at MYRRHA!

• accelerator driven reactor
• lead-bismuth eutectic
• discover new medical
• waste solutions
• Start your next
• MYRRHA

EN We are a crypto mining company with a specialty in immersion mining... meaning all of our computers are cooled by being

• crypto mining company
• specialty in immersion
• computers are cooled
• being

EN Swim, bask and enjoy la vie douce. Spanning 60m, the rooftop infinity pool is heated or cooled to the perfect temperature, depending on the season. When you're hungry or thirsty, refuel with succulent snacks, fresh juices and signature cocktails from the

• Swim
• bask
• enjoy la vie
• Spanning
• rooftop infinity pool
• heated
• temperature
• you're hungry
• thirsty
• refuel with succulent
• fresh juices

EN Bottoms up! We’ll design the perfect label for your liquid assets.

• design the perfect
• liquid

EN They have also leveraged Liquid Markup language for building customised triggers, macros and automations.

• leveraged Liquid Markup
• building customised triggers
• macros

EN Wave Liquid shape in purple color background 676575 Vector Art at Vecteezy

• Wave Liquid shape
• purple color background
• Art at Vecteezy

EN Wave Liquid shape in purple color background Free Vector

• Wave Liquid shape
• purple color background
• Vector